Read Sharp AL-840 (serv.man4) Service Manual online
•
If you use Windows NT 4.0, proceed to step 5.
★
Plug & play
This feature is effective if both the computer and peripheral
equipment are equipped with IEEE 1284 compliant parallel in-
terface.
This feature is effective if both the computer and peripheral
equipment are equipped with IEEE 1284 compliant parallel in-
terface.
NOTE: The screen displayed depends on the version of Windows.
5) Insert the installation CD-ROM into the CD-ROM drive.
Click the Start button and select Run. When the screen shown
below appears, type R:\SETUP (if the CD-ROM is designated as
drive R) and click the OK button. Proceed to step 7.
below appears, type R:\SETUP (if the CD-ROM is designated as
drive R) and click the OK button. Proceed to step 7.
6) "Install From Disk" window will appear. Insert the installation
CD-ROM into the CD-ROM drive. Type R:\ (if the CD-ROM is
designated as drive R) and click the OK button. Proceed to step
7.
designated as drive R) and click the OK button. Proceed to step
7.
7) The installation program will start. To install the printer driver to
the default folder, click the Next button. To select a different
folder, select Browse and type in the new path and folder name.
Click OK and say YES to create the folder, select the Next
button to continue.
folder, select Browse and type in the new path and folder name.
Click OK and say YES to create the folder, select the Next
button to continue.
8) On the display, you will see "printer port to be used". Normally,
this is LPT1 and it is selected automatically.
Ensure that Yes is checked to use the printer as the default
printer.
Finally click the Next button.
Ensure that Yes is checked to use the printer as the default
printer.
Finally click the Next button.
9) A "Confirm installation" window will be displayed. To continue
installation, click the Yes button.
10) When the installation is complete, you will be asked whether or
not to print a test page. If you wish to do so, click the Yes button.
At this time, ensure that paper is loaded in the paper tray.
At this time, ensure that paper is loaded in the paper tray.
11) If the test print completes successfully, click the Finish button.
"The installation of the SHARP AL-800 Series Software is com-
plete." window will be displayed. Click the OK button.
plete." window will be displayed. Click the OK button.
Windows 98:
1) Load paper into the paper tray of the printer. For loading of paper,
see the section on LOADING COPY PAPER found in the copier
operation manual.
operation manual.
2) Turn on the printer.
3) Turn on your computer and start Windows.
NOTE: Before installing the printer driver, be sure to close all other
applications which may be open.
4) When using Windows 98 on a personal computer with plug &
play*, the "Add New Hardware Wizard" window will appear. Click
the Next button and follow the on-screen instructions.
the Next button and follow the on-screen instructions.
•
If the "Add New Hardware Wizard" window does not appear,
proceed to step 8.
proceed to step 8.
*
Plug &play: For plug & play information, see page 5.
5) Select Search for the best driver for your device and click the Next
button.
6) Insert the installation CD-ROM into the CD-ROM drive. Select the
CD-ROM drive and click the Next button.
7) Windows driver file search will find the device "SHARP AL-800
Series". Click the Next button. Proceed to step 9.
8) Insert the installation CD-ROM into the CD-ROM drive. Click the
Start button and select Run. When the window shown below ap-
pears, type R:\SETUP (if the CD-ROM is designated as drive R)
and click the OK button. Proceed to step 9.
pears, type R:\SETUP (if the CD-ROM is designated as drive R)
and click the OK button. Proceed to step 9.
9) The installation program will start. To select a different folder,
select Browse and type in the path and folder name where the
printer driver will be installed. Click OK and say YES to create the
folder, select the Next button to continue. To install the printer
driver to the default folder, click the Next button.
printer driver will be installed. Click OK and say YES to create the
folder, select the Next button to continue. To install the printer
driver to the default folder, click the Next button.
10) On the display, you will see "printer port to be used". Normally,
this is LPT1 and it is selected automatically. Ensure that Yes is
checked to use the printer as the default printer. Finally click the
Next button.
checked to use the printer as the default printer. Finally click the
Next button.
11) A "Confirm installation" window will be displayed. To continue in-
stallation, click the Yes button.
12) When the installation is complete, you will be asked whether or
not to print a test page. If you wish to do so, click the Yes button.
At this time, ensure that paper is loaded in the paper tray.
At this time, ensure that paper is loaded in the paper tray.
13) If the test print completes successfully, click the Finish button.
"The installation of the SHARP AL-800 Series Software is com-
plete." window will be displayed. Click the OK button.
plete." window will be displayed. Click the OK button.
Windows 3.1x:
1) Load paper into the paper tray of the printer. For loading of paper,
see the section on LOADING COPY PAPER in the copier opera-
tion manual.
tion manual.
4 – 5
Click on the first or last page to see other AL-840 (serv.man4) service manuals if exist.