Read Sharp AL-1566 (serv.man17) Service Manual online
AL-1556/1566 TEST COMMAND, FAX SOFT SWITCH, TROUBLE CODES 10 - 36
66
32
Receive data check
(AL-1566)
(AL-1566)
[Function]
Use to check the receive data.
Use to check the receive data.
[Operation]
33
Signal detection check
(AL-1566)
(AL-1566)
[Function]
Use to check the signal detection.
Use to check the signal detection.
[Operation]
34
Communication time
measurement (AL-1566)
measurement (AL-1566)
[Function]
Use to measurement the communication time.
Use to measurement the communication time.
[Operation]
37
Speaker sound volume
setting (AL-1566)
setting (AL-1566)
[Function]
Use to set the speaker sound volume.
Use to set the speaker sound volume.
1: NO SOUND
2: LOW
3: MID
4: HIGH
2: LOW
3: MID
4: HIGH
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
1) Initial display
2) After completion of reception
"xx" is "OK" or "NG" depending on the check
result.
result.
∗
[CLEAR] key: FAX control is terminated.
RECEIVING
RESULT
xx
1) Initial display
When a signal is detected, the display is changed from NONE to the following.
CI/CNG/CED/BT/DT/Flag/SDT/DTMF
∗
[CLEAR] key: FAX control is terminated.
CHECKING NONE
PRESS CLEAR TO STOP
1) Initial display
"xx:xx:xx:xxx" indicates o'clock, minute, second, millisecond.
∗
[CLEAR] key: FAX control is terminated.
COMM. TIME
xx:xx:xx:xxx msec
1) Initial display
2) [
←
/
→
] or after 2sec
Every time when [
→
] key is pressed, the second line is changed in the sequence of 1
→
2
→
3
→
4
→
1.
When [
←
] key is pressed, the sequence is reversed.
∗
[CLEAR] key: FAX control is terminated.
3) [OK] key
xxx: Set content
After 2sec, FAX control is terminated.
SELECT SPEEKER VOL.
PRESS
←
,
→
SELECT (1-4)
1:NO SOUND
SELECT (1-4)
2:LOW
.....
STORED
xxx
Click on the first or last page to see other AL-1566 (serv.man17) service manuals if exist.