Read Sharp PN-V602 (serv.man6) Service Manual online
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 10
■ INSTALLING THE BATTERIES
1 ) Press the cover gently and slide it in the direction of the arrow.
2 ) See the instructions in the compartment and put in the supplied
batteries (R-6 (“AA” size) x 2) PN-ZR01 control kit (optional) with
their plus (+) and minus (-) sides oriented correctly.
3 ) Close the cover.
MEMO
n
When the batteries become exhausted replace them with new
(commercially available) batteries earlier than specified.
n
The supplied batteries (R-6 (“AA” size) x 2) may become
exhausted quickly depending on how they are stored.
exhausted quickly depending on how they are stored.
n
If you will not use the remote control for a long time, remove the batteries.
n
Use manganese or alkaline batteries only.
■ REMOTE CONTROL OPERATION RANGE
The operation range of the PN-ZR01 (optional) remote control unit is
approx. 23 feet (7 m) when aimed directly at the remote control sensor
box. When used at an angle of approx 10° from the center to the top/
bottom/right/left of the remote control sensor, use it within a distance of
bottom/right/left of the remote control sensor, use it within a distance of
approx 16.4 feet (5 m).
CAUTION
n
Do not expose the remote control unit to shock by dropping or
stepping on it. This could lead to a malfunction.
n
Do not expose the remote control unit to liquids, and do not place
it in an area with high humidity.
it in an area with high humidity.
n
The remote control unit may not work properly if the remote con-
trol sensor is under direct sunlight or strong lighting.
n
Objects between the remote control unit and the remote control
sensor may prevent proper operation.
n
Replace the batteries when they run low as this may shorten the
remote control’s operation range.
remote control’s operation range.
n
If a fluorescent light is illuminated near the remote control unit, it
may interfere with proper operation.
n
Do not use it with the remote control of other equipment such as
air conditioner, stereo components, etc.
n
Adjust the angle of the PN-ZR01 (optional) remote control sensor
and have it face the area where operation with the remote control
and have it face the area where operation with the remote control
unit will take place.
7 INPUT
button
(Input mode
selection)
selection)
The menu is displayed. Press
or
to
select the input mode, and press
to enter.
You can select the input terminal by pressing
the INPUT switch of the monitor.
WHEN THE PN-ZB02 (OPTIONAL) IS ATTACHED
*
1
Select the terminal to be used in “D-SUB”
of “INPUT SELECT”.
*
2
Select the terminal to be used in “HDMI”
of “INPUT SELECT”.
of “INPUT SELECT”.
*
3
Select the terminal for “AUDIO SELECT”
which is used for audio input.
*
4
Select the terminal to be used in “DVI” of
“INPUT SELECT”.
*
5
Select the terminal to be used in “BNC” of
“INPUT SELECT”.
“INPUT SELECT”.
8 MENU
button
Displays and turns off the menu screen.
9 SIZE button
The menu is displayed.
Press
or
to select the screen size.
Input mode
Video
Audio
*2
*1
*1
*1
*2
PC D-SUB
PC D-SUB
input terminal
input terminal
Audio input
terminal
terminal
Audio input
terminal
terminal
PC HDMI
PC/AV HDMI
input terminal
input terminal
AV HDMI
AV VIDEO
AV
COMPONENT
COMPONENT
PC/AV HDMI
input terminal
input terminal
PC D-SUB
input terminal
input terminal
PC D-SUB
input terminal
input terminal
*3
Input mode
Video
Audio
*4
*2
*5
PC DVI-D
PC/AV DVI-D
input terminal
input terminal
*4
PC/AV DVI-D
input terminal
input terminal
PC HDMI
PC/AV HDMI
input terminal
input terminal
*2
PC/AV HDMI
input terminal
input terminal
PC D-SUB
PC D-SUB
input terminal
input terminal
PC RGB
PC RGB
input terminals
input terminals
*
5
AV COMPONENT
input terminals
input terminals
AV DVI-D
AV HDMI
AV
COMPONENT
COMPONENT
AV S-VIDEO
AV S-video
input terminal
input terminal
AV VIDEO
AV video input
terminal
terminal
*3
10
c
10
c
Remote control
sensor
sensor
16.4 feet
(5 m)
(5 m)
16.4 feet
(5 m)
23.0 feet
(7 m)
Click on the first or last page to see other PN-V602 (serv.man6) service manuals if exist.