Read Sharp PN-V602 (serv.man6) Service Manual online
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 12
■ ALL MONITORS
Performs operation of all primary/secondary monitors.
n
will be displayed on the menu of the primary.
n
When it receives signals from the remote control unit, “Operating all
monitors.” will be displayed on the secondary screen.
(Excluding power and input mode selection operation)
(Excluding power and input mode selection operation)
n
Settings may not be reflected depending on the state of the con-
nected monitors.
Press
or
to select “EXPAND ITEM”, and press
or
to select to perform this action or not.
1 ) Press
or
to select OK, then press
and return to the
normal screen.
2 ) Perform operation.
CAUTION
n
When the remote control mode is set to “ALL MONITORS” and
“EXPAND ITEM” is set to “ON”, performing remote control operations
that change adjustment values will result in the secondary adjustment
values being the same as the primary adjustment values.
values being the same as the primary adjustment values.
Be careful of this when adjusting individual displays.
MEMO
n
You can copy the setting values of the primary to other monitors
with “COPY SETTING VALUE”.
with “COPY SETTING VALUE”.
n
The buttons on the monitor itself (primary) are also effective in
remote control mode.
n
When monitors connected in a daisy chain are in standby mode
for “LOW POWER”, operation cannot be performed for subse-
quent monitors.
quent monitors.
OFF
For all monitors, only power, input mode selection,
and product information display operations will be
and product information display operations will be
recognized.
ON
For all monitors, all operations will be recognized. After
returning to the normal screen with procedure 3), when
5 minutes have passed from the end of operation, it will
automatically return to “OFF”.
automatically return to “OFF”.
MEMO
n
will be displayed on the menu of
the primary.
n
Even when REMOTE CONTROL MODE is set
to “ALL MONITORS”, certain settings such as
LAN settings and ID No. settings will not be
LAN settings and ID No. settings will not be
reflected on the other monitors.
ALL
Example
ǹȬȸȖ
+&ဪӭᲴ
+&ဪӭᲴ
Ȟǹǿȸ
+&ဪӭᲴ
+&ဪӭᲴ
᪦
ǹȬȸȖ
+&ဪӭᲴ
+&ဪӭᲴ
ǹȬȸȖ
+&ဪӭᲴ
+&ဪӭᲴ
ǛƠƯ᪦Ǜɦƛǔ
Secondary
ID No.: 2
Secondary
ID No.: 3
Primary
ID No.: 1
Secondary
ID No.: 4
Power ON
Power ON
Power ON
Power ON
If the power for the primary is turned "ON", the
power for all the monitors will be turned "ON".
power for all the monitors will be turned "ON".
Press to turn the power "ON"
POWER
ALL [EXPAND ITEM]
MENU
Secondary
ID No.: 2
VOLUME 12
VOLUME 10
VOLUME 9
VOLUME 10
VOLUME 10
Secondary
ID No.: 3
Primary
ID No.: 1
Secondary
ID No.: 4
Secondary
ID No.: 2
Secondary
ID No.: 3
Primary
ID No.: 1
Secondary
ID No.: 4
VOLUME 10
VOLUME 10
Press to lower the volume
VOLUME 11
Click on the first or last page to see other PN-V602 (serv.man6) service manuals if exist.