Read Sharp PN-V602 (serv.man6) Service Manual online
CHAPTER 5. FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
PN-V602 FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
5 – 22
(2) CHECK PROCEDURES BY SERVICE MENU
With an image displayed on the display, use the remote controller to
display SERVICE MENU1 screen, checking the version of the firmware
(VER (LED)).
(VER (LED)).
To display SERVICE MENU1 screen, keep pressing Input + MENU of
the machine for more than 5sec, and press [BRIGHT- (
1 )], [VOL- ( 4 )],
[BRIGHT+ (
3 )] and [VOL+ ( 2 )] in this sequence. When the PN-ZR01
is installed, keep pressing SIZE button of the remote controller for 5sec
or more, and press [BRIGHT- (
1 )], [VOL- ( 4 )], [BRIGHT+ ( 3 )] and
[VOL+ (
2 )] in this sequence.
After checking the version, press [MENU] button of the remote control-
ler to close SERVICE MENU1 screen.
ler to close SERVICE MENU1 screen.
MAIN UNIT ONLY
WHEN THE EXPANSION I/F PWB IS INSTALLED
SERVICE1
SERVICE2
SERVICE3
SERVICE MENU1
1/1
END
̖[MENU]
MODEL
FIRM VERSION(RC BOX)
FIRM VERSION(IRIS)
FIRM VERSION(T-CON)
USAGE TIME
ADJUSTMENT CHECK
㧦PNxxxxx
S/N
㧦XXXXXXXX
VER(MAIN)
㧦OK Ver 1.00
VER(SUB)
㧦OK Ver 1.00
VER(LED)
㧦OK Ver 1.00
㧦OK Ver 1.00
㧦OK XXXXXXXXXX
(11xxxx)C/S
㧦OK 1234ABCDEF
(11xxxx)C/S
㧦OK 00001234
C/S
㧦OK 1234
㧦OK Ver 9.00
㧦100H
㧦
SERVICE1
SERVICE2
SERVICE3
SERVICE MENU1
1/1
END
̖[MENU]
MODEL
FIRM VERSION(RC BOX)
FIRM VERSION(IRIS)
FIRM VERSION(T-CON)
USAGE TIME
ADJUSTMENT CHECK
㧦PNxxxxx
S/N
㧦XXXXXXXX
VER(MAIN)
㧦OK Ver 1.00
VER(SUB)
㧦OK Ver 1.00
VER(LED)
㧦OK Ver 1.00
㧦OK Ver 1.00
FIRM VERSION(EXT IF)
㧦OK Ver 1.00 (10xxxx)
㧦OK XXXXXXXXXX
(11xxxx)C/S
㧦OK 1234ABCDEF
(11xxxx)C/S
㧦OK 00001234
C/S
㧦OK 1234
㧦OK Ver 9.00
㧦100H
㧦
Click on the first or last page to see other PN-V602 (serv.man6) service manuals if exist.