Read Sharp PN-V602 (serv.man6) Service Manual online
CHAPTER 5. FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
PN-V602 FIRMWARE UPDATA PROCEDURES/EDID WRITING PROCEDURES
5 – 19
6 ) By pressing the [Start] button, the firmware updating starts for the
selected ID-number’s monitor.
n
The confirmation window for version and checksum is displayed.
n
Confirm that the version and checksum is correct, and then
press the [OK] button.
n
After completion of the firmware update, the selected ID's moni-
tor is self-reset and the new version of firmware starts running.
tor is self-reset and the new version of firmware starts running.
n
The updating process is completed in about 2 minutes. If the
message “Complete!” is displayed, the update of the selected
ID's firmware has been completed.
n
After completion of the firmware update, the selected ID’s moni-
tor is self-reset and the new version of firmware starts running.
tor is self-reset and the new version of firmware starts running.
7 ) Press the [VERSION] button to confirm the new firmware version of
the selected ID-number's monitor after updating.
8 ) Press the [CHECK SUM] button to confirm the checksum of the
selected ID-number's monitor.
9 ) Select the ID number (ID3) of the next previous monitor (which is
before the updated one). (In order of the RS232C cable connec-
tion)
10) Go back to the step 4). (Repeat the above procedures up to the
front monitor.)
3 - 4. VERSION CHECK PROCEDURES
■ CHECK METHOD BY THE SERVICE MENU
With an image displayed on the screen, use the remote controller to dis-
play the SERVICE MENU1 screen. Check the firmware version (VER
(EXT IF)).
(EXT IF)).
To display SERVICE MENU1, press and hold the [INPUT] + [MENU]
buttons of the Display unit (for 5 seconds or more), and then press the
button of [BRIGHT- (
1 )], [VOL- ( 4 )], [BRIGHT+ ( 3 )] and [VOL+ ( 2 )]
sequentially. When the Display is equipped with PN-ZR01, press and
hold [SIZE] of the remote control (for 5 seconds or more), and then
press the button of [BRIGHT- (
1 )], [VOL- ( 4 )], [BRIGHT+ ( 3 )] and
[VOL+ (
2 )] sequentially.
After confirming the version, press the [MENU] button of the remote
control to close the SERVICE MENU1 window.
SERVICE1
SERVICE2
SERVICE3
SERVICE MENU1
1/1
END
̖[MENU]
MODEL
FIRM VERSION(RC BOX)
FIRM VERSION(IRIS)
FIRM VERSION(T-CON)
USAGE TIME
ADJUSTMENT CHECK
㧦PN-V602
S/N
㧦12345678
VER(MAIN)
㧦OK Ver 1.00
VER(SUB)
㧦OK Ver 1.02
VER(EXT IF)
㧦OK Ver 1.00
VER(LED)
㧦OK Ver 1.00
㧦OK Ver 1.00
㧦OK 000000ABCD
(110623)C/S
㧦OK 000000ABCD
(110625)C/S
㧦OK 0000ABCD
(110720)C/S
㧦OK 0000ABCD
C/S
㧦OK ABCD
㧦OK Ver 9.04
㧦100H
㧦W/B CALIB BRIGHT
Click on the first or last page to see other PN-V602 (serv.man6) service manuals if exist.