Read Sharp PN-S525 (serv.man3) Service Manual online
PN-S525
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 When AUTO INPUT CHANGE is set to OFF.
*4 When STANDBY MODE is set to LOW POWER, LAN and SCHED-
ULE are not used. When STANDBY MODE is set to STANDARD,
12W.
■ DIMENSIONAL DRAWINGS
Note: That the values shown are approximate values.
When mounting the monitor, be sure to use a wall-mount/ceiling-mount
bracket they comply with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10mm). Loose
Note that screw hole depth of the monitor is 3/8 inch (10mm). Loose
holding may cause the product to fall, resulting in serious personal inju-
ries as well as damage to the product. The screw and hole should come
together with over 5/16 inch (8mm) length of thread. Use the bracket
together with over 5/16 inch (8mm) length of thread. Use the bracket
which applied UL1678 standard, and which can endure at least 4 times
or more the weight of the monitor.
Model
PN-S525
LCD element
52” wide (132.2 cm diagonal)
ASV low-reflection black TFT LCD
ASV low-reflection black TFT LCD
Max. resolution
(pixels)
(pixels)
1920
×
1080
Max. colors
16.77 M colors (8 bits/color)
Pixel pitch
0.600 mm (H)
×
0.600 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio >10)
Screen active
area inch (mm)
area inch (mm)
45-3/8
×
25-1/2 (1152.0
×
648.0)
Computer input
signal
signal
Digital (DVI 1.0 standard-compliant),
Analogue RGB (0.7 Vp-p) [75
Analogue RGB (0.7 Vp-p) [75
Ω]
Sync
signal
signal
Horizontal/vertical separate
(TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
(TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color
system
system
PAL, PAL-60, SECAM, NTSC (3.58MHz),
NTSC (4.43MHz)
NTSC (4.43MHz)
Plug and play
VESA DDC2B
Power
management
management
VESA DPMS, DVI DMPM
Input terminals
PC/AV
Digital
DVI-D 24 pin
(HDCP compatible)
(HDCP compatible)
×
1
HDMI
×
1
PC
Analog
Mini D-sub 15 pin,
3 rows
3 rows
×
1,
BNC
*1*2
×
1
Audio
3.5 mm mini stereo jack
×
1
AV
Co mposite
video
video
BNC
×
1
S-Video
×
1
Component
BNC (Y, Cb/Pb, Cr/Pr)
*1
×
1
Audio
RCA pin (L/R)
×
1
Serial (RS-232C)
D-sub 9 pin
×
1
Output terminals
PC/AV
Digital
DVI-D 24 pin
×
1
Audio
RCA pin (L/R)
×
1
Serial (RS-232C)
D-sub 9 pin
×
1
Speaker
7W
+
7W [6
Ω]
LAN terminal
10 BASE-T/100 BASE-TX
Power
requirement
requirement
AC 100V - 240V, 50/60Hz
Operating
temperature
temperature
32°F to 104°F (0°C to 40°C)
Operating
humidity
humidity
20% to 80% (no condensation)
Power
consumption
consumption
275W (Input signal waiting mode: 12W
*3
,
Standby mode: 2.0 W
*4
)
Dimensions
inch (mm)
inch (mm)
Approx. 49-3/8
×
5-7/8
×
29-3/16
(1,254
×
149
×
742) (excluding protrusions)
Weight lbs. (kg)
Approx. 86.0 (39) (excluding the temporary stand)
49-3/8 [1254]
34-3/4 [882]
Opening height
29-3/16 [742]
5-7/8 [149]
3-5/8
[92]
3-3/4 [95]
2-5/8 [66]
Opening width (45-9/16 [1157])
(25-11/16 [653])
Unit: inch [mm]
7-7/8
[200]
[271]
7-7/8
[200]
7-7/8
[200]
7-7/8 [200]
VESA holes
10-11/16
Click on the first or last page to see other PN-S525 (serv.man3) service manuals if exist.