Read Sharp PN-S525 (serv.man3) Service Manual online
PN-S525
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 3
■ PC3 INPUT TERMINAL PINS
■ PC/AV OUTPUT TERMINAL PINS
■ PC2/AV2 INPUT TERMINAL PINS
(HDMITM CONNECTOR)
■ POWER MANAGEMENT
This monitor conforms to VESA DPMS and DVI DMPM. Both your video
card and computer must support the same standard in order for the
card and computer must support the same standard in order for the
monitor’s power management function to work.
DPMS: Display Power Management Signaling
DMPM: Digital Monitor Power Management
* When AUTO INPUT CHANGE is set to OFF.
■ DDC (PLUG AND PLAY)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and com-
puters. Information about resolution and other parameters is exchanged
between the two. This function can be used if the computer supports
between the two. This function can be used if the computer supports
DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication
method used. This monitor supports DDC2B.
method used. This monitor supports DDC2B.
2. SUPPLIED ACCESSORIES
* Sharp Corporation holds authorship rights to the Utility Disk pro-
gram. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal
instructions for your area.
No.
Function
No.
Function
1
Red video signal input
9
+
5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
N.C.
12
DDC data
5
GND
13
Hsync signal input
6
GND for red video signal
14
Vsync signal input
7
GND for green video signal
15
DDC clock
8
GND for blue video signal
No.
Function
No.
Function
1
TMDS data 2
−
13
N.C.
2
TMDS data 2
+
14
+
5V
3
TMDS data 2/4 shield
15
GND
4
N.C.
16
Hot-plug detection
5
N.C.
17
TMDS data 0
−
6
DDC clock
18
TMDS data 0
+
7
DDC data
19
TMDS data 0/5 shield
8
N.C.
20
N.C.
9
TMDS data 1
−
21
N.C.
10
TMDS data 1
+
22
TMDS clock shield
11
TMDS data 1/3 shield
23
TMDS clock
+
12
N.C.
24
TMDS clock
−
No.
Function
No.
Function
1
TMDS data 2+
11
TMDS clock shield
2
TMDS data 2 shield
12
TMDS clock-
3
TMDS data 2-
13
CEC
4
TMDS data 1+
14
N.C.
5
TMDS data 1 shield
15
SCL
6
TMDS data 1-
16
SDA
7
TMDS data 0+
17
DDC/CEC GND
8
TMDS data 0 shield
18
+5V
9
TMDS data 0-
19
Hot-plug detection
10
TMDS clock+
(Mini D-sub 15 Pin)
(DVI-D 24 Pin)
DPMS
Screen
Power
consumption
Hsync
Vsync
ON STATE
Display
275W
Yes
Yes
STANDBY
No
display
12W
*
No
Yes
SUSPEND
Yes
No
OFF STATE
No
No
DMPM
Screen
Power
consumption
Monitor ON
Display
275W
Active OFF
No
display
12W
*
INPUT
Liquid Crystal Display: 1
Remote control
unit: 1
unit: 1
Cable clamp: 2
Temporary stand: 2
Power cord
clamp: 1
clamp: 1
Power cord: 1
R-6 battery ("AA" size): 2
CD-ROM (Utility Disk for Windows): 1
Operation manual: 1
Vertical logo
sticker: 2
sticker: 2
Blank sticker: 1
Place a blank sticker onto the SHARP logo to cover the logo.
Place a blank sticker onto the SHARP logo to cover the logo.
Click on the first or last page to see other PN-S525 (serv.man3) service manuals if exist.