Read Sharp PN-L802B (serv.man11) User Guide / Operation Manual online
8
E
• When installing, removing or moving the monitor, ensure that this is carried out by at least 6 people.
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
• Do not use any screw holes other than VESA holes for installation.
• Do not use any screw holes other than VESA holes for installation.
Mounting Precautions (For SHARP dealers and service engineers)
n
Attaching the Tray
1. Remove the cover from the back of the monitor.
2. Secure the tray mounting bracket.
Secure using 2 tray mounting screws (M5 long) (supplied)
and 1 tray mounting screw (M5 short) (supplied).
(1)
(2)
(3)
Tray mounting
bracket (supplied)
Tray mounting screws
(M5 long) (supplied)
Cover
Tray mounting screw
(M5 short) (supplied)
3. Attach the cover onto the back of the monitor and
secure the tray.
Insert the tray into the tray mounting bracket and secure
Insert the tray into the tray mounting bracket and secure
with 2 M4 tray mounting screws (supplied).
Tray
(supplied)
M4 tray mounting screws
(supplied)
Screw removed in step 1
Screw removed in step 1
n
Removing the temporary stand
Caution
• The temporary stand is only for use with this monitor. Do
not use it for any other devices.
1. Spread a soft thick cloth (such as a blanket) on a
stable level surface on which the entire monitor can
be placed, and place the monitor on it with the screen
facing down.
be placed, and place the monitor on it with the screen
facing down.
2. Remove the stand fixing screws and then remove the
stand.
3. Attach the cover (supplied) onto the back of the
monitor.
Secure using 2 cover screws (M4 with washers) (supplied).
Secure using 2 cover screws (M4 with washers) (supplied).
Cover screws
(M4 with washers)
(supplied)
Cover screws
(M4 with washers)
(supplied)
If a tray will not be attached, affix the cover seal (supplied)
to the cover.
Click on the first or last page to see other PN-L802B (serv.man11) service manuals if exist.