PN-L802B (serv.man11). Setup Manual - Sharp Monitor User Guide / Operation Manual. Page 9

Read Sharp PN-L802B (serv.man11) User Guide / Operation Manual online

ENGLISH
7
E
Turning Power On/Off
Caution
•  Turn on the monitor first before turning on the PC or
playback device.
Turning on the main power
Main power switch
Caution
•  The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
•  When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
•  For a complete electrical disconnection, pull out the main
plug.
Turning power on/off
Press the POWER button to turn the power ON/OFF.
POWER
button
Power LED
Status
Status of the monitor
Green lit
Power on
Orange lit
Power off (Standby mode)
Green flashing
Input signal waiting mode
n
Date/time setting
•  If the time has yet to be set when the monitor is first turned
on, the date/time setting screen appears. Set the date and 
time.
DATE/TIME SETTING 
SET 
CANCEL 
/
/
OK···[MENU] 
:
   
:
01
01
12
/
12
AM
00
:
/ 20
1.  Press 
 , 
 , 
 or 
 to select the date and 
time, and press 
 or 
 to change the numerical 
values. 
2.  Press 
 or 
 to select SET and then press 
MENU
 .
•  Be sure to set the date and time.
•  The date/time setting screen will close automatically if no
operation is performed for about 15 seconds. The date
and time can be set using DATE/TIME SETTING from
the OPTION menu when the date/time setting screen 
disappears.
TIPS
Set the date in “Month/Day/Year” order.
Set the time on a 12-hour basis.
The clock is maintained by the internal battery.
If you already set the time but the date/time setting 
screen appears when the power is turned on, the 
internal battery may be exhausted. Please contact 
your local Sharp servicing dealer or service center for 
assistance with battery replacement.
Estimated service life of the internal battery: About 5
years (depending on monitor operation)
The initial battery was inserted at the factory when the 
monitor was shipped, so it may run out of power before 
its expected operation life.
Page of 28
Display

Click on the first or last page to see other PN-L802B (serv.man11) service manuals if exist.