Read Sharp PN-L802B (serv.man11) User Guide / Operation Manual online
ENGLISH
5
E
Supplied Components
Preparing the Remote Control Unit and the Touch Pen
Specifications
Installing the batteries
1. Press the cover gently and slide it in the direction of the
arrow.
2. See the instructions in the compartment and put in the
supplied batteries (R-6 (“AA” size) x 2) with their plus (+)
and minus (-) sides oriented correctly.
3. Close the cover.
Inserting the battery
1. Rotate the battery cap and remove it, and then pull out the
cover.
Battery cap
2. Insert the supplied battery (LR-03 (“AAA” size)) in the
orientation shown, and attach the cover and battery cap.
If any component should be missing, please contact your dealer.
Liquid Crystal Display Monitor: 1
Remote control unit: 1
Cable clamp: 3
Power cord: 1
R-6 battery (“AA” size): 2
CD-ROM (Utility Disk for Windows): 1
Setup Manual (this manual): 1
Touch pen: 1
Pen tip (for touch pen): 2
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Touch pen battery
(LR-03 (“AAA” size)): 1
USB cable: 1
Eraser: 1
Tray: 1
Tray mounting bracket: 2
Tray mounting screws:
M5 long x 4 / M5 short x 2 / M4 x 2
Cover: 2
Cover screws (M4 with washers): 4
Cover seal: 2
Terminal label: 1
Used when installing the expansion board
PN-ZB01 (optional).
Cover Sharp logo: 1
Place this sticker onto the SHARP logo to cover
the logo.
Model
PN-L802B
Power requirement
AC 100 V - 240 V, 2.9 A, 50/60 Hz
Operating temperature *
41°F to 95°F (5°C to 35°C)
Operating humidity
20% to 80% (no condensation)
Power consumption (Maximum)
255 W [When PN-ZB01 (optional) is attached: 260 W]
Dimensions (excluding protrusions)
inch (mm)
Approx. 74 (W) x 5-5/16 (D) x 45-9/16 (H) (1880 x 135 x 1157)
Weight
lbs. (kg)
Approx. 224.9 (102) (excluding the temporary stand)
[PN-ZB01 (optional):
Approx. 1.102 (0.5)]
* Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Click on the first or last page to see other PN-L802B (serv.man11) service manuals if exist.