PN-G655RE (serv.man3). Complete - Sharp Monitor Service Manual (repair manual). Page 9

PN-G655RE

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 7

■ SCHEDULE

You can set the time to switch the monitor on and off.
Set this function with “SCHEDULE” in the OPTION menu.

1) Press 

 or 

 to select the SCHEDULE number, and press

 .

2) Set the SCHEDULE. (See the description below.)

Press 

 or 

 to select items, and press 

 or 

 to

change the setting.

3) Press .

SCHEDULE becomes effective.

Caution:

•  Do not switch off the main power after setting the SCHEDULE.

•  Specify the correct date and time.

SCHEDULE does not function unless the date and time are specified.

•  Check regularly that the set date and time are correct.

Note:

•  Up to 8 SCHEDULE items can be registered.

•  Setting the SCHEDULE flashes the power LED alternately in red and

orange in standby mode.

•  A SCHEDULE that has a large number has precedence over that of a

small number when schedules overlap.

■ ADVANCED items (AV input)

Adjust the hue control.

Reduce the noise of playback images on video.
Setting a higher level reduces more noise. However, it may cause blur-

ring on an image.

Reduce block noise caused by digital compression.

Specify whether to perform 3-dimension Y/C separation.

If dot interference or cross-colour is occurring in fast-motion scenes,
selecting “OFF” may improve the image quality.

1

Q

: SCHEDULE effective

-

: SCHEDULE not effective

2 POWER

ON

: Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the

monitor in standby mode.

3 DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE.

ONLY ONCE:

Executes the SCHEDULE once on the specified day.

Specify the day of the week to execute the SCHEDULE.

EVERY WEEK:

Executes the SCHEDULE on the specified day of the week every
week. Specify the day of the week to execute the SCHEDULE.

Periodic setting such as “Monday through Friday” is also possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day of the
week.

4 TIME

Specifies the time to execute the SCHEDULE.
Set the time on a 24-hour basis.

5 INPUT

Specifies the input mode at power-on. When not specifying, the
screen at the previous power-off appears.
Input modes displayed on “PC1/AV1” depend on DVI SELECT set-
tings.

Input modes displayed on “PC3/AV2” depend on BNC SELECT set-
tings.

SCHEDULE

No.

POWER

DAY OF THE WEEK

TIME

INPUT

XXXX/XX/XX XXX  XX:XX:XX 

PC2 ANALOG

(2)

OK…[MENU]

1 0 2 4 x 7 6 8

V: 60 Hz    H: 48.4 kHz

(1)

(3)

(4)

(5)

MENU