Read Sharp PN-G655RE (serv.man3) Service Manual online
PN-G655RE
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 4
■
REMOVING THE TEMPORARY STAND
Prepare wall-hanging brackets or a stand to mount the monitor unit.
Read the manual for the brackets or stand for the proper mounting pro-
cedure. (The screw holes for mounting brackets (M10 x 4 holes) are
provided on the rear of the monitor.)
Caution:
• The monitor is heavy. Make sure to handle the monitor with at least 3
people.
• This monitor is fixed to the temporary stand when shipped from the
factory. Please note that this stand is for temporary use only until the
monitor is properly mounted.
1) Hold the monitor with the handles to prevent it from falling down,
and remove the stand fixing screws (4).
2) Lift the monitor by holding it with the handles and the underside of
the unit.
3) When the installation is complete, attach the included stand hole
protection covers, using the supplied screws.
(1) Remove the screws from the monitor unit.
(2) Secure the stand hole protection covers with the screws
removed in step (1).
• The temporary stand is specifically designed for this monitor. Do not
use for other devices.
2. ADJUSTMENT METHOD
[ADJUSTMENTS FOR PC SCREEN DISPLAY]
■ Automatic adjustment
When you use the PC2 input terminal or PC3 input terminals to display
a PC screen for the first time, or when you change the setting of the PC,
a PC screen for the first time, or when you change the setting of the PC,
use the automatic screen adjustment.
1) Switch the input to PC2 or to PC3 and display the adjustment pat-
tern. (See the description below.)
2) Press
and use
or
to display the SCREEN menu.
3) Press
and select “AUTO”.
4) Press
.
The automatic adjustment is complete in several seconds.
5) Press
twice to close the menu screen.
Note: If the screen cannot be adjusted properly with one automatic
adjustment, repeat the automatic adjustment two or three times.
Try manual adjustment if necessary.
■ Screen display for adjustment
Before making adjustments in the SCREEN menu or PICTURE menu,
display an image to brighten the entire screen. If you are using a Win-
display an image to brighten the entire screen. If you are using a Win-
dows PC, use the adjustment pattern on the supplied CD-ROM.
<Opening the adjustment pattern>
1) Load the supplied CD-ROM into the computer's CD-ROM drive.
2) Open the CD-ROM in [My Computer].
3) Double-click [Adj_uty.exe].
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4) When adjustment is finished, press the [Esc] on the computer's key-
board to quit the adjustment programme.
5) Eject the CD-ROM from the CD-ROM drive.
Note: If the display mode on the computer you are using is 65,000 col-
ors, the color levels in the color pattern may appear differently or
greyscale may appear to be colored. (This is due to the specifica-
greyscale may appear to be colored. (This is due to the specifica-
tions of the input signal and is not a malfunction.)
Screws
Screws
MENU
MENU
Click on the first or last page to see other PN-G655RE (serv.man3) service manuals if exist.