Read Sharp PN-G655RE (serv.man3) Service Manual online
PN-G655RE
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 5
■ Installing the batteries
1) Press the cover gently and slide it in the direction of the arrow.
2) See the instructions in the compartment and put in the supplied bat-
teries (2 R-6 batteries) with their plus (+) and minus (-) sides ori-
ented correctly.
ented correctly.
3) Close the cover.
Note:
• The supplied batteries (2 R-6 batteries) may become exhausted
faster depending on the storage condition. It is recommended that
you replace them with new batteries (commercially available) ear-
lier than specified.
• If you will not use the remote control for a long time, remove the
batteries.
• Use manganese or alkaline batteries only.
■ Remote control operation range
The operation range of the remote control unit is approx. 5m at an angle
of approx 10° from the centre to the top/bottom/right/left of the remote
control sensor.
of approx 10° from the centre to the top/bottom/right/left of the remote
control sensor.
Caution:
• Do not expose the remote control unit to shock by dropping or step-
ping on it. This could lead to a malfunction.
• Do not expose the remote control unit to liquids, and do not place it
in an area with high humidity.
• The remote control unit may not work properly if the remote control
sensor is under direct sunlight or strong lighting.
• Objects between the remote control unit and the remote control
sensor may prevent proper operation.
• Replace the batteries when they run low as this may shorten the
remote control’s operation range.
• If a fluorescent light is illuminated near the remote control unit, it
may interfere with proper operation.
• Do not use it with the remote control of other equipment such as air
conditioner, stereo components, etc.
■ Dual screen display
You can display the screens of the PC input signal and AV input signal
simultaneously.
simultaneously.
Set this function with “PIP MODES” in the PIP/PbyP menu.
• The currently selected input signal is displayed on the main screen.
• You cannot simultaneously display the screens of signals of the same
type, such as two types of PC input signals or two types of AV input
signals.
signals.
Note:
• You might infringe on a copyright of the author which is protected
by copyright law when you display the images of the computer
screen and television/VCR simultaneously for profit-making or to
show the image to the public.
• The screen size for dual-screen display is the same as the screen
size for single-screen display. The DotbyDot screen is displayed in
NORMAL size except when it is set as the PIP main screen.
• When dual-screen display is selected, the screen cannot be
enlarged.
• When dual-screen display is selected, the following adjustments of
ADVANCED are invalid and adjusting is disabled.
3D-NR, MPEG-NR and 3D-Y/C
*1 Select the terminal for DVI SELECT.
*2 Select the terminal for BNC SELECT.
*2 Select the terminal for BNC SELECT.
8MENU button
Displays and turns off the menu screen
9SIZE button
The menu is displayed.
Press
or
to select the screen size.
10°
5 m
5 m
5 m
Remote control
sensor
10°
PIP
: A sub screen is displayed inside a main screen.
PbyP
: A main screen and a sub screen are displayed in a line.
PbyP2 : Displays a main screen which measures 1280 pixels in the
longest direction and a sub screen in a line.
PIP
PbyP
PbyP2
Main screen
Sub
screen
Main
screen
Sub
screen
Main screen
Sub
screen
Click on the first or last page to see other PN-G655RE (serv.man3) service manuals if exist.