Read Sharp LL-T181A (serv.man3) Service Manual online
1-2. When the AC adapter is installed on the stand.
Remove the stand rear cover.
Remove the power supply terminal cover.
Remove the stand front cover.
Install the AC adapter on the stand.
(1)
Install the AC cord to the AC adapter.
(2)
Pass the cord through the hole in the stand as shown in the left
sketch.
sketch.
(3)
As shown in the sketch, put the AC adapter on the stand fixing
guide.
guide.
Install the stand front cover.
Wind the DC cord onto the stand hook, pass it through the upper
hole in the stand, and connect to the AC adapter connection
terminal of the monitor.
hole in the stand, and connect to the AC adapter connection
terminal of the monitor.
Install the power supply cover.
Slide the cover upward
by holding it with your
hands as shown in the
drawing.
by holding it with your
hands as shown in the
drawing.
Sliding the cover
upward disengages it.
Then, remove the cover
pulling it up from the
bottom.
upward disengages it.
Then, remove the cover
pulling it up from the
bottom.
Tilt to top of the display
all the way back as
shown.
all the way back as
shown.
Slide the power jack
cover downward to
remove it.
cover downward to
remove it.
Slide the cover forward as
shown in the drawing to
remove it.
shown in the drawing to
remove it.
(3)
(2)
(1)
Cord Feed Hole
Fit the cover to the stand, then slide it
back to lock it in place.
back to lock it in place.
Wind the DC cord around the
hooks. Wind the cord a proper
number of times so that the
cord can reach the AC adapter
hooks. Wind the cord a proper
number of times so that the
cord can reach the AC adapter
Feed the cord through
the hole in the cover.
the hole in the cover.
Click on the first or last page to see other LL-T181A (serv.man3) service manuals if exist.