Read Sharp LL-T1610W (serv.man3) Service Manual online
5. Remove the four screws and then remove the stand from the
monitor.
6. Attach the rear cover.
To attach it follow step 8 of Connecting the monitor to a power
source.
source.
7. Attach the arm to the monitor with four screws.
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
reattached be sure to use the original screws.
Using different screws could lead to malfunction.
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
reattached be sure to use the original screws.
Using different screws could lead to malfunction.
Information
4~6mm
The screws used to
attach the arm should be
M4 screws with a length
of 4 mm ~ 6 mm
protruding from the
surface to be attached.
Using different screws
could lead to malfunction
or may lead to the
monitor falling off, internal
damaged, personal injury.
attach the arm should be
M4 screws with a length
of 4 mm ~ 6 mm
protruding from the
surface to be attached.
Using different screws
could lead to malfunction
or may lead to the
monitor falling off, internal
damaged, personal injury.
Information
Screw used to
attach arm
Arm
Arm
Part of monitor
to which arm is
attached