Read Sharp LB-1085 (serv.man2) Parts Guide online
LB-1085
DISASSEMBLY AND ASSEMBLY
4 – 8
4) Pull up the actuator on the FPC connector, and disconnect the FPC.
Stick the FPCs on the angle with scotch tape or with some tape whose adhesive is not left on the FPC or the angle*.
(*If the adhesive is left on the FPCs or the angle, it may cause trouble.)
Remove 3 screws (M5 x 10).
Fix the caster jig for open/close on the right side with 2 screws.
FPC
FPC
FPC connector
Angle
Scotch tape
* Don't disconnect the connector of the LCD side.
Side view
Open/close caster jig
Click on the first or last page to see other LB-1085 (serv.man2) service manuals if exist.