Read Sharp LB-1085 (serv.man2) Parts Guide online
LB-1085
DISASSEMBLY AND ASSEMBLY
4 – 7
■
LED PWB disassembly and assembly
1) Remove the front cabinet. (Refer to “
■ Front cabinet disassembly and assembly”)
2) Remove 2 screws A (M3 x 6), and remove the LED PWB holder. Disconnect 1 connector, and remove the LED PWB from the LED PWB holder.
3. BACKLIGHT DISASSEMBLY AND ASSEMBLY
■
Backlight PWB disassembly and assembly
Note: If the protection panel is installed, remove it before attaching the open/close caster jig.
1) Remove the front cabinet. (Refer to “
■ Front cabinet disassembly and assembly”)
2) Remove the LED PWB. (Refer to “
■ LED PWB disassembly and assembly”)
3) Remove 8 screws A (M4 x 5) and 8 screws B (M5 x 5 Black), and remove 2 side covers.
A
A
A
B
B
B
B
B
B
B
B
A
A
A
A
A
A
Side cover
Side cover
Click on the first or last page to see other LB-1085 (serv.man2) service manuals if exist.