Read Sharp UP-X300 (serv.man86) Driver / Update online
6. Long time to recover from suspend mode has been reduced.
7. Under certain conditions (2 past voids after expand feature causes windows CE or froze
error) resolved.
7. Under certain conditions (2 past voids after expand feature causes windows CE or froze
error) resolved.
8. Sort groups now correctly printed.
9. After editing manually the GT3 at B/O the calculation for GT1 is now correct.
10. BS is now working correctly with zero priced condiments linked to PLU with prices
11. Leading PLU and their linked PLU's are now printed at KP even when they assigned to
different sort groups
9. After editing manually the GT3 at B/O the calculation for GT1 is now correct.
10. BS is now working correctly with zero priced condiments linked to PLU with prices
11. Leading PLU and their linked PLU's are now printed at KP even when they assigned to
different sort groups
12. Auto table feature is now working correctly, when the Recall feature is carried out
between Auto Table selection
between Auto Table selection
13. Illegal characters no longer appear in the payment print line in cases where under bar (_)
character in bold are used for descriptions
character in bold are used for descriptions
14. Deposits for customers are now stored in the customer file and therfore deposit refund
can be carried out
can be carried out
15. In case the following two conditions are met the EOD was not correctly performed:- 1.
The EOD report included the Clerk (Individual) and the Clerk report was set to issue all PLU
2. EOD was executed more than two times without performing a "shutdown)
The EOD report included the Clerk (Individual) and the Clerk report was set to issue all PLU
2. EOD was executed more than two times without performing a "shutdown)
16. The length of a manually entered Backup/Restore filename is now limeted to the entry of
13 characters maximum
13 characters maximum
[Compatibility]
Only the CSV data is compatible with that of previous versions.
Do not install the new Version with “keep current data” or copy and paste existing
"PRESET FOLDER" from older versions to the new release version 1.4.7.0.
Please use the Back Office/Data control function a “Backup” of the current CSV
Data and “Restore” it after the installation of the OS and the application software.
This procedure is necessary due to some changes of the memory management of
the new OS version.
Only the CSV data is compatible with that of previous versions.
Do not install the new Version with “keep current data” or copy and paste existing
"PRESET FOLDER" from older versions to the new release version 1.4.7.0.
Please use the Back Office/Data control function a “Backup” of the current CSV
Data and “Restore” it after the installation of the OS and the application software.
This procedure is necessary due to some changes of the memory management of
the new OS version.
[OS versions]
UP-X200 should be updated to OS version 1.23
UP-X300 should be updated to OS version 1.07
[Software version]
After OS update use only UP-X300 V1.4.7.0 or higher, in combination with UP-X200
version 1.0.6.0 or higher.
UP-X200 should be updated to OS version 1.23
UP-X300 should be updated to OS version 1.07
[Software version]
After OS update use only UP-X300 V1.4.7.0 or higher, in combination with UP-X200
version 1.0.6.0 or higher.
1.4.7.0
At an overlapped Clerk operation it possible again to void the first entered PLU.
It was previously not possible to operate PLU/SUB and PLU name function in certain locally
realised screen ( UK / Retail screen number 11)
It was previously not possible to operate PLU/SUB and PLU name function in certain locally
realised screen ( UK / Retail screen number 11)
The modifier and PLU search function is now working again, even so there is no “Item Key
Area” in the screen of UP-X300
Area” in the screen of UP-X300
1.4.6.2
At the previous version, item count down function (86item function) did not work in case the
following programming was set as "No":
POS Programming / Function / Waste / Waste stock adjustment
Now the Count down (86item function) function works, regardless of the above setting.
following programming was set as "No":
POS Programming / Function / Waste / Waste stock adjustment
Now the Count down (86item function) function works, regardless of the above setting.
KP printing stopped in case several KP printers were connected to one UPX300 and print data
was send for each KP at the same timing.
was send for each KP at the same timing.
In previous versions it was possible to change IP address of a terminal without performing
MRS example change IP then select memory Initialise caused error.
The registration screen could go blank if items were registered and the next key pressed was
CANCEL. This bug has been corrected.
MRS example change IP then select memory Initialise caused error.
The registration screen could go blank if items were registered and the next key pressed was
CANCEL. This bug has been corrected.
1.4.0.0
After EOD error (Open Check exist) if the operator chooses “Force to execute End Of Day” the
terminal sales data is not cleared. The Sales data is now cleared.
F.E Application Version number report can be issued
terminal sales data is not cleared. The Sales data is now cleared.
F.E Application Version number report can be issued
Click on the first or last page to see other UP-X300 (serv.man86) service manuals if exist.