Read Sharp UP-X300 (serv.man86) Driver / Update online
5. Condiment PLU tables can be assigned to a Price level:
For each Condiment table a price level can be assigned, which is applied to all linked
For each Condiment table a price level can be assigned, which is applied to all linked
6. The width of “scroll bar’s” at UP-X300 can be changed:
By “X300_StartUPMain2.ini” file setting it is now possible to change the width of the scroll bar.
Caution: Above change is only effective after the terminal is twice rebooted.
The changed width is applied to the registration window; BS screen; all pop up screens and to
all BackOffice screens with scroll bars.
By “X300_StartUPMain2.ini” file setting it is now possible to change the width of the scroll bar.
Caution: Above change is only effective after the terminal is twice rebooted.
The changed width is applied to the registration window; BS screen; all pop up screens and to
all BackOffice screens with scroll bars.
The following items 7 to 12 are resolved issues:
7. Previously the “Taxable amount totalizer” was not updated in case a transaction was
automatically finalized by removal of a Clerk key.
automatically finalized by removal of a Clerk key.
8. In case the “PLU Auto delete function” was executed at EOD it was previously still possible
to register the deleted PLU at the Terminal (Front End application)
9. Send Print data was previously lost under the condition that the paper near-end check was
set as "Yes" and the printer was switched off.
set as "Yes" and the printer was switched off.
10. Modem connection was at the previous versions only working correctly at the UP-X300
COM port 1. Now it works correctly at all COM ports.
11. The initialization of a connected modem was previously not correctly performed. With
Online activated at COM 2 or 3 a part of the initialisation command was still send to COM1. In
case a printer was connected to COM1 this sometimes resulted in a print of strange character.
Online activated at COM 2 or 3 a part of the initialisation command was still send to COM1. In
case a printer was connected to COM1 this sometimes resulted in a print of strange character.
12. The ATCOM.INI can now be modified via the BackOffice programming:
/POS Device programming/ Device programming / Online
/POS Device programming/ Device programming / Online
Ensure the X300 OS is V1.07 and X200 OS is 1.23
Version 1.4.11.1 is compatable with 1.4.7.0 and above, please do not select "keep
current data" if upgrading from a version older than 1.4.7.0, also do not copy and paste
PRESET folder from versions older than 1.4.7.0
current data" if upgrading from a version older than 1.4.7.0, also do not copy and paste
PRESET folder from versions older than 1.4.7.0
The following items 1 to 4 are specification changes or additions
1. Employee Calculation Report has been added
Please note the report is only shown in B/O
Please note the report is only shown in B/O
2. Auto Shutdown and Reboot after EOD Dependent
upon the setting within the configuration file the Terminal can be set to automatically
shutdown and reboot after Manual EOD or Timed EOD is carried out, V1.4.11.1 is set to
shutdown after manual EOD (added reliability/performance)
upon the setting within the configuration file the Terminal can be set to automatically
shutdown and reboot after Manual EOD or Timed EOD is carried out, V1.4.11.1 is set to
shutdown after manual EOD (added reliability/performance)
3. Reboot button is added to the "Memory Warning" message screens
4. Partition Dismount at Manual Shutdown
Dependent upon the setting within the configuration file the HD2 partition will be dismounted
at time of manual shutdown, to access HD2 at this point tap the screen 20 times. (added
reliability/performance)
Dependent upon the setting within the configuration file the HD2 partition will be dismounted
at time of manual shutdown, to access HD2 at this point tap the screen 20 times. (added
reliability/performance)
The following items 5 to 16 are resolved problems
5. In case of bad wireless conditions buffered print jobs of x200 have often been issued twice,
the message << reprint >> is now printed at top of receipts.
the message << reprint >> is now printed at top of receipts.
X300
V1.4.11.1
X200
V1.0.10.0
V1.4.11.1
X200
V1.0.10.0
Click on the first or last page to see other UP-X300 (serv.man86) service manuals if exist.