Read Sharp UP-5300 (serv.man4) Service Manual online
*
Align threaded holes completely before securing the I/F PWB with
screws.
screws.
16. REAR DISPLAY UP-I20DP
1) Remove the Display filter
1
2) Remove the Rear cover angle
2
from the Display filter
1
a) Remove the two Screws
3
3) Connect the display cable
4
to the connector: CN: 1 on the Main
PWB
4) Install the Display unit
5
to the cabinet
a) Align the positioning boss
A
of the bottom cabinet with the
angle hole
A
in the display unit.
17. POLE DISPLAY: UP-P20DP
1) Install the core
6
to the display cable
1
.
2) Install the core
7
to the display earth cable
4
.
3) Connect the Display cable
1
to the remote display connector on
the back of the set.
4) Fix the display cable
1
with the cable holder
2
, and tighten the
screw
3
on the back of bottom cabinet.
5) Fix the display earth cable
4
to the main chassis with the screw
5
.
*
Cable holder
2
Use the following type of cable holder supplied with the UP-
P20DP.
P20DP.
•
"3N" (large type)
2
3
1
4
6
5
7
UP-5300VI
– 8 –
Click on the first or last page to see other UP-5300 (serv.man4) service manuals if exist.