Read Sharp UP-5300 (serv.man4) Service Manual online
*
How to Extend Display Pole
The pole can be extended by installing the attached pole to the
standard pole.
standard pole.
COMPONENT LIST:
No.
NAME
USE
Q’ty
7
,
G
Pole cabinet
Pole extension
2
H
Screw (M3
×
4)
Pole connection
4
I
Screw (M4
×
16)
Securing the UP-P20DP to
the wooden table
the wooden table
4
J
Screw (M4
×
20)
Securing the UP-P20DP to
the metal table
the metal table
4
K
Nut
Securing the UP-P20DP to
the metal table
the metal table
4
L
Display cable (S)
This display cable (S)
should be used instead of
the standard cable and
earth wire if the UP-20DP’s
standard pole is removed
to lower the height of the
UP-20DP.
should be used instead of
the standard cable and
earth wire if the UP-20DP’s
standard pole is removed
to lower the height of the
UP-20DP.
1
M
Earth wire (S)
1
1) Remove the five screws
1
.
2) Remove the Base angle
2
.
3) Remove the PWB unit
3
from the Base cabinet
4
.
4) Remove the display cable
5
from the PWB unit
3
.
5) Remove the two screws
6
.
6) Remove the Base cabinet
4
from the pole cabinet
7
.
7) Pull the Ratchet
9
attached to the pole cabinet
7
out of the
Display unit
8
by turning it as shown in Figure A.
8) Remove the two screws
F
.
9) Remove the pole cabinet
7
from the Ratchet
9
.
Pattern side(PWB)
Core
1
2
3
4
5
1
6
4
7
7
8
9
10
10
9
UP-5300VI
– 9 –
Click on the first or last page to see other UP-5300 (serv.man4) service manuals if exist.