Read Sharp UP-3515 (serv.man8) User Guide / Operation Manual online
– 1 –
1. PORT CONNECTIONS
2. INSTALLING THE INTEGRATED
REAR DISPLAY (UP-I20DP)
1) Remove the two screws. Disengage the four pawls and remove the
rear cover unit.
Clamping: 5.0±0.2kgf.cm
Clamping: 5.0±0.2kgf.cm
2) Replace the UP-I20DP Sheet metal with a new one.
It attaches using the removed screw A .
Units produced prior to Feb. 2004 will require replacement of
support angle.
Units produced prior to Feb. 2004 will require replacement of
support angle.
3) Remove sheet 1 from the rear filter, and remove Rear cover Sheet
2
and install the UP-I20DP 5 and secure with two screws 3 , 4 .
4) Wrap the UP-I20DP harness one turn around the rib 1 ,
insert the connector 2 and install the rear cover unit.
From 2004 February production, the sheet metal for the UP-X500 is
included in the package.
included in the package.
Ref. No. Symbol
Description
1
RS232 COM - 1
2
RS232 COM - 2
3
RS232 COM - 3
4
RS232 COM - 4
5
UP-P20DP/DPB Remote Pole display connection
6
UP-I20DP Integrated display connection
7
Ethernet LAN connector
8
Cash Drawer connectors 1 and 2
1
2
3
4
5
6
7
8
1
2
3
4
3
2
1
3
2
1
1
2
DRAWER
1
2
2
3
4
3
2
1
3
2
1
1
2
DRAWER
A
A
1
3
3
5
4
2
*
This screw is packed
together with the UP-I20DP.
1
2
DC jack
When removing the DC plug
from the DC jack, be sure to
release the lock and use a
great care not to touch the
peripheral ribs with your
fingers.
*
Click on the first or last page to see other UP-3515 (serv.man8) service manuals if exist.