Read Sharp UP-3500 (serv.man29) Service Manual online
UP-3500 (V)
DISASSEMBLY AND ASSEMBLY
– 14 –
5. Touch panel PWB disassembly
1) Cut the snap band at two positions with nippers, and remove the
main unit upper cabinet from the LCD unit.
Clamping: 10.0±0.5kgf.cm
Clamping: 10.0±0.5kgf.cm
2) Remove one screw, release the four pawls, and remove the rear
cabinet A.
Clamping: 4.0±0.2kgf.cm
Clamping: 4.0±0.2kgf.cm
3) Remove the two screws. Disengage the six pawls, and remove the
rear cabinet B.
Clamping: 5.5±0.5kgf.cm
4) Disconnect the five connectors. Remove the two screws, and
remove the touch panel PWB.
Clamping: 5.0±0.5kgf.cm
*Note for installation
Attach the tie band as shown below when installing the unit.
pawl
pawl
pawl
pawl
pawl
pawl
pawl
pawl
20mm from the
lower edge of the
plate
lower edge of the
plate
Bind the cables as
shown.
shown.
thin
medium
thick
Top
Bottom
1. Tie band Attach
here.
20mm from the
outlet of the cables.
outlet of the cables.
thin
medium
thick
Top
Bottom
Bind the cables as
shown.
shown.
2. Tie band Attach
here.
Click on the first or last page to see other UP-3500 (serv.man29) service manuals if exist.