Read Sharp UP-3500 (serv.man29) Service Manual online
UP-3500 (V)
DISASSEMBLY AND ASSEMBLY
– 13 –
3. DC jack, switch disassembly
1) Remove the two screws, and remove the angle. Remove the DC
Jack from the angle.
Clamping: 5.0±0.2kgf.cm
Clamping: 5.0±0.2kgf.cm
2) Remove the two screws, and remove the switch.
Clamping: 5.0±0.2kgf.cm
Caution: When reassembling, be careful of the direction.
4. Clerk PWB disassembly
1) Remove four screws
A and two screws B, and remove the hinge
angle.
*When removing the hinge angle, the earth plate
C will come off. Be
careful not to lose it.
A: Clamping: 10.0±0.5kgf.cm
B: Clamping: 4.0±0.2kgf.cm
B: Clamping: 4.0±0.2kgf.cm
2) Remove two screws, and remove the clerk PWB unit.
Clamping: 6.0±0.2kgf.cm
3) Turn the cap counterclockwise to remove it. Remove two screws,
and remove the clerk angle from the clerk PWB unit.
Clamping: 4.0±0.2kgf.cm
Clamping: 4.0±0.2kgf.cm
RED
BLUE
BLACK
RED
C
A
A
B
B
A
Click on the first or last page to see other UP-3500 (serv.man29) service manuals if exist.