Read Sharp XE-A137 (serv.man3) User Guide / Operation Manual online
4
PARTS AND THEIR FUNCTIONS
1
External View
Plug the AC adapter connector into the AC
adapter jack, then plug the AC adapter into
the wall outlet.
adapter jack, then plug the AC adapter into
the wall outlet.
Cheque slot
Printer cover
Display
Mode switch
RS-232 connector
(Only for the XE-A147)
Option battery shutter
(for the XE-A1BT)
(Only for the XE-A147)
SD card slot
(Important: For SD type card
SDHC 4GB to 32GB)
AC adapter jack
Drawer lock
Drawer
Keyboard
AC adapter
AC adapter connector
Reset switch (Only for the XE-A147)
Doing so may damage or delete the data.
DO NOT push the reset switch unless
instructed to do.
2
Printer
The printer is a receipt (one station) type thermal printer, and therefore it does
not require any type of ink ribbon or cartridge. The average life of the printer is
approximately 5 million lines.
When removing the printer cover, lift up its rear.
When installing the printer cover, hook it on the pawls on the cabinet and shut it.
not require any type of ink ribbon or cartridge. The average life of the printer is
approximately 5 million lines.
When removing the printer cover, lift up its rear.
When installing the printer cover, hook it on the pawls on the cabinet and shut it.
Caution: The paper cutter is mounted on the printer cover. Be careful not
to cut yourself.
Print roller arm
Roller
Sensor
Printer head
NOTE
Do not attempt to remove the paper with the print roller arm in the hold
position. This may result in damage to the printer and printer head.
position. This may result in damage to the printer and printer head.
Click on the first or last page to see other XE-A137 (serv.man3) service manuals if exist.