Read Sharp XE-A137 (serv.man3) User Guide / Operation Manual online
7
PREPARING THE CASH REGISTER
Unpack the cash register and make sure all accessories are included. For details of accessories, please refer to
“SPECIFICATIONS” section.
“SPECIFICATIONS” section.
For installing the cash register, find a stable surface near an AC outlet where the cash register will not subject to
water sources or direct sunlight.
water sources or direct sunlight.
For preparing the cash register, please follow the three steps shown below; “1 Initializing the Cash Register” on
this page, “2 Installing Batteries” on page 8, and “3 Installing a Paper Roll” on page 9.
this page, “2 Installing Batteries” on page 8, and “3 Installing a Paper Roll” on page 9.
1
Initializing the Cash Register
In order to operate the cash register properly, you must initialize it before operating for the first time. Follow this
procedure.
procedure.
1.
Insert the mode/drawer lock key into the mode switch and turn it to the REG position.
2.
Insert the AC adapter into the AC outlet.
IMPORTANT: This operation must be performed without batteries installed.
3.
The cash register has now been initialized. The register display will show “0.00”
with “ ”.
with “ ”.
NOTE
If this does not happen when inserting the AC adapter, then the initialization has not been done
successful. (This will occur when the voltage is high because you operated the cash register before
starting initialization.) Wait at least one minute after pulling out the AC adapter and reinsert the AC
adapter into the AC outlet only after this waiting time has passed.
starting initialization.) Wait at least one minute after pulling out the AC adapter and reinsert the AC
adapter into the AC outlet only after this waiting time has passed.
Click on the first or last page to see other XE-A137 (serv.man3) service manuals if exist.