UP-600, UP-700 (serv.man7). UP600 700 Training Manual (Updated March2002) - Sharp ECR Handy Guide. Page 6

5

The Clerk/Cashier system on the UP600/700 is much more flexible than previous
machines .

You will notice a change to the System Pre-set line 910.

There is no selection required for the type of clerk system i.e. Clerk Code entry
or Clerk Pre-sets or Real keys as any combination of theses systems can now be
operational on the UP600/700.

There are 12 real Clerk keys as standard (this can be upgraded to 126)

Before you can use the Real key system you must set a key number in Program
position if the key number is left at zero then the Real Key does not work.

The Real key will always take priority over the code or pre-set entry. (e.g. if the
Real key is inserted you will be unable to sign on with another code or pre-set.)

The Overlap feature is for Clerks only (not Cashiers)

When setting up Overlap on this machine, as well as carrying out the usual jobs such
as creating overlap file  and changing job 910-A you will also have to set job code
909-D (Transaction in progress) even if you are not using the real key system.

Each Overlap file takes up approximately 10k of RAM

The GC RECEIPT feature works slightly different to the ERA770 and UP3300.

Opened Table list on display
(Automatically at clerk insert or by key press)

Simplified operation of Tables
(No need for NC key)