Read Sharp ER-A570 (serv.man6) Service Manual online
<<When sliding backwards>>
Fig. 5
CHAPTER 4. REMOVING THE TOP
CABINET
1. Removing the top cabinet
Fig. 1
1) Open the printer cover
1
.
2) Remove the ribbon cover
2
.
Lift the left end of the ribbon cover and slide it to the left.
3) Lift the pop-up display and rotate as illustrated above.
4) Remove the three screws
3
suited on the lower cabinet.
5) Remove the grounding wire
4
.
Fig. 2
6) Remove the top cabinet.
As illustrated, lift the top cabinet in the direction of the arrow C,
slide it in the direction of the arrow D and lift it in the direction of
the arrow E.
slide it in the direction of the arrow D and lift it in the direction of
the arrow E.
2. Replacing the top cabinet
Install the top cabinet in the reverse order of removing. Before install-
ing, make sure that each connector is connected securely and that
the grounding wire is secured.
ing, make sure that each connector is connected securely and that
the grounding wire is secured.
541
1
3
2
4
3
E
D
C
3
Click on the first or last page to see other ER-A570 (serv.man6) service manuals if exist.