Read Sharp ER-A570 (serv.man6) Service Manual online
CHAPTER 1. GENERAL
This manual describes the installation and operational test proce-
dures for the Model ER-A570 system ECR options.
Be sure to read the "BEFORE INSTALLING OPTIONS" prior to in-
stalling any option.
Descriptions of the specifications of the ECR and options subject to
change.
dures for the Model ER-A570 system ECR options.
Be sure to read the "BEFORE INSTALLING OPTIONS" prior to in-
stalling any option.
Descriptions of the specifications of the ECR and options subject to
change.
Note: This manual describes only options whose installing proce-
dures need to be explained.
∗
BERORE INSTALLING OPTIONS
1. If you install any options in an ER-A570 register already in use,
you must reset the totals. Please notify its user before performing
the installation.
If the register is not reset, sales data stored in the register may be
destroyed due to possible incorrect installation.
the installation.
If the register is not reset, sales data stored in the register may be
destroyed due to possible incorrect installation.
2. Print out the SRV-mode and PGM2-mode programs before install-
ing any option. It may be necessary to modify each program after
installation. These printouts are needed for this modification.
installation. These printouts are needed for this modification.
3. If you install the option PWBs (ER-A6IN, ER-A5RS), option control
ROM (ER-A57R1) and expansion RAM chip in the ER-A650 regis-
ter already in use, perform data saving for memory protection by
using the SIO interface in advance.
ter already in use, perform data saving for memory protection by
using the SIO interface in advance.
4. As a safety measure, be sure to turn the mode switch to the OFF
position and unplug the register before installing any option.
5. The ER-A570 is equipped with various SRV-mode functions to aid
you in installing the options. Never enter any job numbers other
than those shown in each of the following sections, so that data
stored is not destroyed.
than those shown in each of the following sections, so that data
stored is not destroyed.
6. After installing any options, start the ER-A570 register by perform-
ing the service reset or the master reset.
Service reset
1) Turn the mode switch to the SRV’ position to
turn on the power.
2) Turn the mode switch to the SRV position.
Sample printout
PRG. RESET ***
PRG. RESET ***
Master reset
1) Turn the mode switch to the SRV’ position to
turn on the power.
2) Turn the mode switch to the SRV position,
holding down the journal feed key.
Sample printout
MASTER. RESET ***
MASTER. RESET ***
CHAPTER 2. LIST OF OPTIONS
1. Options
NO.
NAME
MODEL
DESCRIPTION
1
REMOTE PRINTER
E R – 0 3 R P
Via SRN I/F (ER-A6IN)
E R – 0 4 R P
2
REMOTE DRAWER
E R – 0 3 D W
4B/8C, MAX. 3 units
3
COIN CASE
E R – 4 8 C C 3
4B/8C
4
COIN CASE COVER
E R – 0 2 C V 1 ~ 5
For ER-48CC3
5
EXPANSION RAM CHIP
E R – 0 1 R A
32K bytes RAM chip
E R – 0 2 R A
128K bytes RAM chip
6
EXPANSION MEMORY BOARD
E R – 0 1 M B
128K bytes memory board with 3 IC sockets (For ER-02RA)
E R – 0 2 M B
1M bytes memory board
7
IN-LINE SYSTEM
E R – A 6 I N
SRN inline I/F
8
ON-LINE SYSTEM
E R – A 5 R S
2ports RS232 I/F
9
CONTROL ROM
E R – A 6 1 R 1
Control for ER-A6IN snd ER-A5RS
10
PRESETS LOADER
E R – 0 2 F D
FD unit
11
CONNECTION CABLE
E R – A 5 C B
Loader cable
12
SLIP PRINTER
E R – 3 1 S P
13
1 HOLE CLERK KEY
E R – A 5 C L
14
WMF CLERK KEY I/F
E R – A 6 W F
2. Service options
NO.
NAME
PARTS CODE
PRICE RANK
DESCRIPTION
1
SERVICE KEY
L K G I M 7 1 1 3 R C Z Z
AK
For the mode switch
2
DRIP-PROOF SWITCH COVER
G C O V B 7 0 4 7 R C Z Z
BA
3
MODE KEY GRIP COVER
L K G I M 7 1 2 6 R C Z Z
AL
OPkey only
4
JOURNAL NEAR END SENSOR
D K I T – 8 6 4 3 R C Z Z
BG
5
DRAWER FIXING KIT
D K I T – 8 6 3 3 R C Z Z
BE
6
ADDITIONAL CLERK KEY
(For ER-A5CL)
(For ER-A5CL)
L K G I M 7 3 4 6 R C Z Z
AX
Key No. = 7
L K G I M 7 3 4 7 R C Z Z
AX
Key No. = 8
L K G I M 7 3 4 8 R C Z Z
AX
Key No. = 9
L K G I M 7 3 4 9 R C Z Z
AX
Key No. = 10
L K G I M 7 3 5 0 R C Z Z
AX
Key No. = 11
L K G I M 7 3 5 1 R C Z Z
AX
Key No. = 12
L K G I M 7 3 5 2 R C Z Z
AX
Key No. = 13
L K G I M 7 3 5 3 R C Z Z
AX
Key No. = 14
L K G I M 7 3 5 4 R C Z Z
AX
Key No. = 15
3. Service tools
NO.
NAME
PARTS CODE
PRICE RANK
1
EXPANSION PWB
C K O G – 6 7 0 8 R C Z Z
BU
2
SIO LOOP BACK CONECTOR
U K O G – 6 7 0 4 R C Z Z
AV
4. Supplines
NO.
NAME
PARTS CODE
PRICE RANK
DESCRIPTION
1
ROLL PAPER
D P A P R 1 0 0 6 C S Z Z
AR
5rolls/pack
2
INK RIBBON
P R B N – 6 6 4 0 R C Z Z
AX
3
INK FOR STAMP
U I N K – 1 0 0 1 C C Z Z
AK
5cc
4
KEY SHEET
P S H E K 6 8 2 3 B H Z Z
AK
Programming character sheet
P S H E K 6 8 2 2 B H Z Z
AR
Standard character sheet
P S H E K 6 7 7 7 R C Z Z
AC
Blank character sheet
– 1 –
Click on the first or last page to see other ER-A570 (serv.man6) service manuals if exist.