Read Sharp DV-S15 (serv.man8) Service Manual online
1-7-5
TESTMODE
E56***D FE *.*** BE *.*** AVD *.*
TEST4-MEASUREMENT MODE
DISC:DVD / DUAL LAYER / OPPOSITE
END:******H / ******H
STATUS: * * * * * * * *
DISC:DVD / DUAL LAYER / OPPOSITE
END:******H / ******H
STATUS: * * * * * * * *
PLAY MODE-ERROR RATE
1. L-0/030000 HEX
2. L-0/220000 HEX
3. L-1/FC0000 HEX
4. L-1/E00000 HEX
1. L-0/030000 HEX
2. L-0/220000 HEX
3. L-1/FC0000 HEX
4. L-1/E00000 HEX
EXIT:
POWER
RETURN:
RETURN
(I) when loading DVD
E56***D FE *.*** BE *.*** AVD *.*
TEST4-MEASUREMENT MODE
DISC: AUDIO CD
TIME: **:**
STATUS: * * * * * * * *
DISC: AUDIO CD
TIME: **:**
STATUS: * * * * * * * *
PLAY MODE-ERROR RATE
1. 00:02
2. 60:00
1. 00:02
2. 60:00
EXIT:
RETURN:
RETURN
(II) when loading CD/VCD
Fig. g Error Rate Mode Screen
In "PLAY MODE-ERROR RATE" of fig. g, each item
means the following:
means the following:
1. Inner circumference of loaded disc (on DVD:
inner circumference of layer 0)
2. Outer circumference of loaded disc (on DVD:
outer circumference of layer 0)
3. Outer circumference of layer 1 on loaded disc (on
DVD only: when in parallel, inner circumference)
4. Inner circumference of layer 1 on loaded disc (on
DVD only: when in parallel, outer circumference)
In some cases, items 2,3 and 4 may not be shown on
the screen depending on the content of the loaded
disc.
the screen depending on the content of the loaded
disc.
8. Select the address where the error rate is to be
measured using number buttons on the remote
control unit.
control unit.
Fig. h will appear on the screen. In table (*2), the
screen will show for each 80ECC block, the number
of errors corrected on the 1st PO/PI/2nd PO and the
number of uncorrected errors. The number of cor-
rected errors will appear on the VFD. (Fig. i)
screen will show for each 80ECC block, the number
of errors corrected on the 1st PO/PI/2nd PO and the
number of uncorrected errors. The number of cor-
rected errors will appear on the VFD. (Fig. i)
DISC:DVD / DUAL LAYER / OPPOSITE
STATUS: * * * * * * * *
ERROR RATE SELECT NO.[4]
1. L-0/030000 HEX
2. L-0/220000 HEX
3. L-1/FC0000 HEX
4. L-1/E00000 HEX
NOW MEASURE:******H - ******H
STATUS: * * * * * * * *
ERROR RATE SELECT NO.[4]
1. L-0/030000 HEX
2. L-0/220000 HEX
3. L-1/FC0000 HEX
4. L-1/E00000 HEX
NOW MEASURE:******H - ******H
EXIT:
POWER
RETURN:
RETURN
correct
uncorrect
1 st
PO
2 nd
PO
PI
(*2)
(I) when loading DVD
DISC: AUDIO CD
STATUS: * * * * * * * *
ERROR RATE SELECT NO.[4]
1. 00:02
2. 60:00
STATUS: * * * * * * * *
ERROR RATE SELECT NO.[4]
1. 00:02
2. 60:00
NOW MEASURE: ** : ** ; ** - ** : ** : **
EXIT:
POWER
RETURN:
RETURN
correct
uncorrect
1 st
PO
2 nd
PO
PI
(*2)
(II) when loading CD/VCD
Fig. h Measuring Error Rate Mode Screen
Fig. i VFD in Measuring Error Rate Mode (example)
9. To finish measuring the error rate, remove the disc
and turn the power off.
