SD-CX1 (serv.man5). Part 2 - text (Page 12-36) - Sharp Audio Service Manual (repair manual). Page 4

– 15 –

For details about the procedure to remove the MD mechanism
from the main unit, refer to the Disassembly Procedure, Steps
1-8 and 15-16 in the main unit and also the MD section.
(Referring to page14)

After pulling out the optical pickup connector, wrap the end
of the connector in conductive aluminium foil to prevent the
optical pickup from being destroyed by static electricity.

1. Remove the screw (A1) x 1 pc.

Take utmost care so that the magnetic head is not damaged
when it is mounted.

1. Remove the screw (B1) x 1 pc.
2. Remove the Hooks (B2) x 3 pcs., and remove the MD

Loading PWB.

3. Remove the screws (B3) x 2 pcs., and remove the MD

Loading motor.

1. Remove the screws (C1) x 3 pcs., and remove the MD sled

motor.

2. Remove the optical pickup.

          Be careful so that the gear is not damaged.
          (The damaged gear emits noise during searching.)

MD Mechanism

(A1)x1

ø1.7x 5mm

Magnetic Head

Optical Pickup

(B3)x2
ø1.7x 3mm

(B1)x1
ø1.7x 6mm

MD Loading Motor

MD Loading
Motor PWB

(B2)x2

(B2)x1

(C1)x2
ø1.4x4.5mm

(C1)x1

ø1.4x5mm

Optical
Pickup

MD Sled Motor

MD Mechanism
Switch PWB

Washer