SD-CX1 (serv.man5). Part 2 - text (Page 12-36) - Sharp Audio Service Manual (repair manual). Page 10

– 21 –

Outline: Readout of the set value after automatic adjustment (for judging difference from initial value)

Forced operation of pickup (Inner/Outer circumference feed)
During the PLAY mode, the number of errors accumulated for 10 seconds (750 frames) is displayed.

Basic CD operation by CD-PLAY button
During the TEST mode, the display is turned on and the following buttons become effective.

Operation

1. CD-PLAY: CD operation according to steps

STEP 1: LD ON by pressing CD PLAY button in the stop mode
STEP 2: Focus ON by pressing CD PLAY button in STEP 1
STEP 3: CLV servo ON by pressing CD PLAY button in STEP 2
STEP 4: Tracking servo ON by pressing CD PLAY button in STEP 3
STEP 5: Sub-code readout/display by pressing CD PLAY button in STEP 4

* Keep pressing the CD PLAY button for more than 1 second to shift to STEP 5 directly.

2. CD STOP

: To stop the playback operation (shifting from each step to the stop mode)

 / To reset display (during display of coefficient)

3. CD SKIP-UP (TUNING   / 

 )

: Forcible shift in the pickup FWD direction

4. CD SKIP-DOWN (TUNING   / 

 )

: Forcible shift in the pickup REV direction
  Sliding is stopped when the PU_IN switch is turned on.

5. MD-STOP

: Automatic adjustment (at the present pickup position)

6. POWER

: Canceling the test mode

7. REC MODE

: To read the coefficient register while the CD operation is stopped/

 To display the error number during CD playback

8. VOLUME UP/DOWN

: Normal volume control

9. CD/MD OPEN/CLOSE

: Normal open/close operation

10. CD EJECT

: Normal CD eject

Press the REC-MODE button during the stop mode to read the following items.
Press the C-STOP button to return to the normal display.

Focus balance

_ _ F B : 

× ×

7 F

0 0

8 0

Focus gain

_ _ F G : 

× ×

1 F

0 0

E 0

Tracking balance

_ _ T B : 

× ×

7 F

0 0

8 0

Tracking gain

_ _ T G : 

× ×

1 F

0 0

E 0

Focus offset

F O F F : 

× ×

7 F

0 0

8 0

Tracking offset

T O F F : 

× ×

7 F

0 0

8 0

RFRP

R F R P : 

× ×

7 F

0 0

8 0

Even if the CD-PLAY button is pressed initially, automatic adjustment is not obtained. Press the MD-STOP button in the stop
mode to gain CD-PLAY for automatic adjustment. Thereafter press the CD-STOP button to stop automatic adjustment.
Press the REC-MODE button to display automatically adjusted values.

Press the REC-MODE button during playback to display the number of errors accumulated for 10 seconds (750 frames).
Press the REC-MODE button during ERR display to return to the normal TEST mode display.

TNO Display

Time Display

N: Normal speed
H: Double speed

N
H