Read Sharp SD-AT50H (serv.man17) Service Manual online
SD-AT50H
– 50 –
38
P60/CTS0/RTS0
DSP_CS
Input
DSP IC serial send/receive strobe output.
39
P57/RDY/CLKOUT
DSP_RESET
Output
DSP IC RESET output.
40*
P56/ALE
N.C.
Output
Set it as an output terminal and fix it to Low since it is not used.
41
P55/HOLD
FLASH_EPM
Input
Connected to VSS via pull-down resistor.
(Setting for when writing on Flash) Functionally not used.
(Setting for when writing on Flash) Functionally not used.
42*
P54/HLDA
DSP_UC15
Output
External ROM for DSP download program. Page select output.
43*
P53/BCLK
DSP_US16
Output
External ROM for DSP download program. Page select output.
44*
P52/RD
DSP_UC17
Output
External ROM for DSP download program. Page select output.
45*
P51/WRH/BHE
N.C.
Output
Set it as an output terminal and fix it to Low since it is not used.
46
P50/WRL/WR
FLASH_CE
Input
Connected to VCC via pull-up resistor.
(Setting for writing on Flash)
(Setting for writing on Flash)
47
P47/CS3
TIMER_LED
Output
Timer stand-by LED control.
“H” output : LED on, “L” output : LED off
“H” output : LED on, “L” output : LED off
48
P46/CS2
DD_LED
Output
DOLBY DIGITAL IND.
“H” output : LED on, “L” output : LED off
“H” output : LED on, “L” output : LED off
49
P45/CS1
STD_LED
Output
Sound MODE STANDARD IND.
“H” output : LED on, “L” output : LED off
“H” output : LED on, “L” output : LED off
50
P44/CS0
DTS_LED
Output
DTS IND.
“H” output : LED on, “L” output : LED off
“H” output : LED on, “L” output : LED off
51
P43/A19
SURR_LED
Output
Sound MODE STANDARD IND.
“H” output : LED on, “L” output : LED off
“H” output : LED on, “L” output : LED off
52
P42/A18
STEREO_LED
Output
STEREO IND.
“H” output : LED on, “L” output : LED off
“H” output : LED on, “L” output : LED off
53
P41/A17
DPL_LED
Output
DOLBY PRO LOGIC IND.
“H” output : LED on, “L” output : LED off
“H” output : LED on, “L” output : LED off
54
P40/A16
B_LIGHT
Output
LCD backlight circuit control output.
“H” : backlight ON, “L” : backlight OFF
“H” : backlight ON, “L” : backlight OFF
55
P37/A15
VOL_DA
Output
Data latch output for the electron VOL IC control signal.
56
P36/A14
VOL_CL
Output
Output of the clock for the electron VOL IC control signal.
57*
P35/A13
N.C.
Output
Set it as an output terminal and fix it to Low since it is not used.
58*
P34/A12
N.C.
Output
Set it as an output terminal and fix it to Low since it is not used.
59*
P33/A11
N.C.
Output
Set it as an output terminal and fix it to Low since it is not used.
60*
P32/A10
N.C.
Output
Set it as an output terminal and fix it to Low since it is not used.
61
P31/A9
TEST1
Input
Input terminal for test. If it is “L” at RESET, it switches to a mode
where it operates separately without communicating with the
microcomputer.
where it operates separately without communicating with the
microcomputer.
62
VCC
VCC
Input
Power supply input for this microcomputer. (3.3 V)
Backup power supply.
Backup power supply.
63*
P30/A8(/-/D7)
N.C.
Output
Set it as an output terminal and fix it to Low since it is not used.
64
VSS
GND
—
Connected to GND (VSS).
65*
P27/A7(/D7/D6)
ROM
Output
Fixed to L.
66
P26/A6(/D6/D5)
DSP_ABOOT
Output
Fixed to H.
67*
P25/A5(/D5/D4)
N.C.
Output
Set it as an output terminal and fix it to Low since it is not used.
68*
P24/A4(/D4/D3)
N.C.
Input/Output
Set it as an output terminal and fix it to Low since it is not used.
69*
P23/A3(/D3/D2)
L-MUTE
Output
Audio mute output of the VCR OUT.
H : MUTE OFF, L : MUTE ON
H : MUTE OFF, L : MUTE ON
70
P22/A2(/D2/D1)
DIG_FUNC+B
Output
Power supply control output for external DIG. input.
External DIG. FUNC : “L” output, Others : “H” output
External DIG. FUNC : “L” output, Others : “H” output
71
P21/A1(/D1/D0)
BASS-SW
Output
Output for controlling the gain of the SUBWOOFER amp.
“H” output : BASS OFF, “L” output : BASS ON.
“H” output : BASS OFF, “L” output : BASS ON.
72
P20/A0(/D0/-)
S_MUTE
Output
System mute control output.
“L” output : mute ON, “H” output: mute OFF.
“L” output : mute ON, “H” output: mute OFF.
73
P17/D15/INT5
NONPCM
Input
Input for detecting whether the AUDIO signal is PCM or not.
“L” : AUDIO PCM, “H” : NON AUDIO PCM.
“L” : AUDIO PCM, “H” : NON AUDIO PCM.
IC301 RH-iX0563AWZZ: DSP System Microcomputer (IX0563AW) (2/3)
Terminal Name
Pin No.
Input/Output
Function
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
Port Name
Click on the first or last page to see other SD-AT50H (serv.man17) service manuals if exist.