Read Sharp QT-CD210 User Guide / Operation Manual online
<P=002>
(Continued)
■
Recording from the built-in radio
1
Set the function switch to AM or FM.
●
Tune in to the station to be recorded.
2
Load a blank cassette into the cassette compart-
ment.
ment.
3
Press the PAUSE button.
4
Press the RECORD button.
5
Press the PAUSE button again.
To stop recording:
Press the STOP/EJECT button.
Press the STOP/EJECT button.
■
Erasing a recorded tape
1
Set the function switch to TAPE.
2
Load the tape to be erased into the cassette
compartment.
compartment.
3
Press the RECORD button.
HEADPHONES
●
Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.
phones, make sure the volume level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended imped-
ance is 32 ohms.
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended imped-
ance is 32 ohms.
●
Connect the headphones plug to the PHONES
socket. The speakers will be automatically dis-
connected. Adjust the volume by using the VOL-
UME control.
socket. The speakers will be automatically dis-
connected. Adjust the volume by using the VOL-
UME control.
MAINTENANCE
■
Internal care
●
Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
■
External care
●
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
a diluted soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or
other chemicals.
other chemicals.
QT-CD210H(SUK) TINSE0034SJZZ
6
Click on the first or last page to see other QT-CD210 service manuals if exist.