Read Sharp QT-CD210 User Guide / Operation Manual online
<P=003>
POWER SOURCE
■
AC power
To AC INPUT
AC 230-240 V, 50 Hz
5
4
6
1
3
2
To an AC socket
Connect the AC power lead to the AC power input
socket, then connect the AC power lead plug to an
AC socket.
socket, then connect the AC power lead plug to an
AC socket.
Notes:
●
If the unit will not be used for a long period of
time, remove the AC power lead from the AC
socket.
time, remove the AC power lead from the AC
socket.
●
Connection of the AC power lead to the unit
disconnects the batteries.
disconnects the batteries.
●
Never use a power lead other than the one
supplied. Use of a power lead other than the one
supplied may cause an electric shock or fire.
supplied. Use of a power lead other than the one
supplied may cause an electric shock or fire.
■
Battery power
1
Disconnect the AC power lead, and remove the
battery compartment cover.
2
Insert 6 "D" size batteries (UM/SUM-1, R20,
HP-2 or similar) into the battery compartment.
●
When inserting or removing the batteries
③
and
⑥
, push them towards the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the
unit to malfunction.
unit to malfunction.
●
Batteries are not included.
3
Replace the battery compartment cover.
Precautions for battery use:
●
Insert the batteries according to the direction
indicated on the rear panel.
indicated on the rear panel.
●
Replace all old batteries with new ones at the
same time.
same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery
leakage.
unit will not be used for long periods of time. This
will prevent potential damage due to battery
leakage.
Caution:
●
Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
mium battery, etc.).
Battery replacement:
Replace the batteries when they become weak
and/or recording or playback is impaired. This may
occur even though radio broadcasts are audible.
Replace the batteries when they become weak
and/or recording or playback is impaired. This may
occur even though radio broadcasts are audible.
RADIO OPERATION
1
Set the function switch to AM or FM.
2
Use the TUNING control to tune in to the desired
station.
station.
●
During FM stereo reception, it automatically
switches to monaural when the signal is weak.
switches to monaural when the signal is weak.
Aerial adjustment
ON/STAND-BY
(Function)
(Function)
TUNING
FM
AM
After use:
Set the ON/STAND-BY switch to STAND-BY.
Set the ON/STAND-BY switch to STAND-BY.
QT-CD210H(SUK) TINSE0034SJZZ
3
Click on the first or last page to see other QT-CD210 service manuals if exist.