QT-CD210 - Sharp Audio User Guide / Operation Manual

qt-cd210 user guide / operation manual
Model
QT-CD210
Pages
8
Size
280.16 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Audio / Portable
File
qt-cd210.pdf
Date

Read Sharp QT-CD210 User Guide / Operation Manual online

QT-CD210H
QT-CD220H
OPERATION MANUAL
MODEL
TO
<P=001>
PORTABLE CD STEREO SYSTEM
Thank you for purchasing this SHARP product.  
For the best performance, read this manual care-
fully.  It will guide you in operating your SHARP
product.
NOTE FOR USERS IN THE U.K.   
SERVICE INFORMATION  
In the unlikely event of your equipment requiring repair,
please contact the dealer or supplier from whom it was
purchased. Where this is not possible, please contact
the telephone number listed below. You will then be
given details of how to obtain service. 
- 0345-125387 -  
Please note; all calls will be charged at local rate.  
 
Certain replacement parts and accessories may be ob-
tained from our main parts distributor.
 WILLOW VALE ELECTRONICS LTD.
In the unlikely event of this equipment requiring repair
during the guarantee period, you will need to provide
proof of the date of purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at
the time of purchase.
The mains lead of this product is fitted with a non-rewire-
able (moulded) plug incorporating a 3A fuse. Should the
fuse need to be replaced, a BSI or ASTA approved BS
1362 fuse marked     or     and of the same rating as
above, which is also indicated on the pin face of the plug
must be used.   
   
Always refit the fuse cover after replacing the fuse. Never
use the plug without the fuse cover fitted.   
   
In the unlikely event of the socket outlet in your home
not being compatible with the plug supplied, cut-off the
mains plug and fit an appropriate type.   
   
DANGER:   
The fuse from the cut-off plug should be removed and
the cut-off plug destroyed immediately and disposed of
in a safe manner.   
   
Under no circumstances should the cut-off plug be in-
serted elsewhere into a 13A socket outlet as a serious
electric shock may occur.   
   
To fit an appropriate plug to the mains lead, follow the
instructions below:   
   
IMPORTANT:   
The wires in the mains lead are coloured in accordance
with the following code:   
  
Blue                : Neutral   
Brown             : Live   
   
As the colours of the wires in the mains lead of this
product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
  
 ●  
The wire which is coloured blue must be connected to
the plug terminal which is marked N or coloured black. 
 ●  
The wire which is coloured brown must be connected
to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is con-
nected to the earth terminal in your three pin plug.
   
Before replacing the plug cover, make sure that:   
MANCHESTER  0161-682-1415 
READING           01189-876444  
 ●  
If the new fitted plug contains a fuse, its value is the
same as that removed from the cut-off plug.
 ●  
The cord grip is clamped over the sheath of the mains
lead and not simply over the lead wires.
   
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.   
QT-CD210H/QT-CD220H(SUK) TINSE0046SJZZ
TO
<P=001>
SPECIAL NOTES 
The letters in brackets contained in the model
number indicate the colour of the product only.
Operation and specifications are unaffected.
When the ON/STAND-BY switch is set at
STAND-BY position,  mains voltage is still pres-
ent inside the unit. 
Warning:
This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation
and when not in use for a long period.
Recording and playback of any material may
require consent, which SHARP is unable to give.
Please refer particularly to the provisions of the
Copyright Act 1956, the Dramatic and Musical
Performers Protection Act 1958, the Performers
Protection Acts 1963 and 1972 and to any sub-
sequent statutory enactments and orders.
This equipment complies with the requirements
of Directives 89/336/EEC and 73/23/EEC as
amended by 93/68/EEC.
Warning:
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Caution:
Use of controls, adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure. 
As the laser beam used in this compact disc
player is harmful to the eyes, do not attempt to
disassemble the cabinet. Refer servicing to
qualified personnel only.
ACCESSORY
AC power lead 
×
 1
Notes:
The AC power lead is located in the packing
material.
Parts and accessories mentioned in this oper-
ation manual other than those in the drawing are
not included.
PRECAUTIONS 
General
Do not use oil, solvents, petrol, paint thinners or
insecticides on the unit.
Do not expose the unit to moisture, to tempera-
tures higher than 60˚C (140˚F) or to extreme low
temperatures.
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home compu-
ters, facsimiles, etc.) which generates electrical
noise.
Hold the AC power plug by the head when re-
moving it from the AC socket, as pulling the lead
can damage internal wires.
When cleaning the heads, pinch roller, etc,
remove the AC power plug from the wall socket
as the unit contains high voltages.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
Use the unit on a firm, level surface free from
vibration, and do not place anything on the top
of the unit.
If the unit does not work properly whilst in use,
set the ON/STAND-BY switch to STAND-BY and
then to ON again.
If an electrical storm is taking place near you, it
is suggested that you disconnect the AC power
lead from the AC socket for safety.
The ventilation should not be impeded by cover-
ing the ventilation openings with items, such as
newspapers, tablecloths, curtains, etc.
No naked flame sources, such as lighted cand-
les, should be placed on the apparatus.
Attention should be drawn to the environmental
aspects of battery disposal.
The apparatus is designed for use in moderate
climate.
Warning:
The voltage used must be the same as that specified
on this unit. Using this product with a higher voltage
other than which is specified is dangerous and may
result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
Condensation
Sudden temperature changes, storage or operation
in an extremely humid environment may cause con-
densation inside the cabinet (CD pickup, tape
heads, etc.).
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or
cassette) in the unit until normal playback is possible
(about 1 hour).
QT-CD210H(SUK) TINSE0034SJZZ
1
<P=002>
(Continued)
Warning:
CD players use a laser pickup which can damage
the eyes if viewed directly. Do not look at the pickup,
and do not touch the pickup directly.
Care of compact discs
Compact discs are fairly resistant to damage, how-
ever mistracking can occur due to an accumulation
of dirt on the disc surface.
Follow the guidelines below for maximum enjoyment
from your CD collection and player.
Do not write on either side of the disc, particularly
the non-label side. Signals are read from the
non-label side.  Do not mark this surface.
Keep your discs away from direct sunlight, heat,
and excessive moisture.
Always hold the CDs by the edges. Fingerprints,
dirt, or water on the CDs can cause noise or
mistracking. If a CD is dirty or does not play
properly, clean it with a soft, dry cloth, wiping
straight out from the centre, along the radius.
Cassette tape
For playback, use normal or low-noise tape for
the best sound. (Metal or CrO
2
 tape is not rec-
ommended.)
For recording, use only normal tape.
Do not use C-120 tapes, tapes with large
diameter reels, or poor-quality tapes, as they
may cause malfunctions.
Before loading a tape into the cassette compart-
ment, tighten the slack with a pen or pencil.
Cassettes have removable tabs which prevent
accidental recording or erasing from taking
place. Removing the tab will protect the corre-
sponding side from being erased. Cover the tab
holes with adhesive tape to erase or record
again.
Side A (1)
Tab for side B (2)
Tab for side A (1)
NAMES OF CONTROLS AND INDICATORS 
1
1.
(TAPE) Record Button
1
2.
(TAPE) Play Button
1
3.
(TAPE) Rewind Button
1
4.
(TAPE) Fast Forward Button
1
5.
(TAPE) Stop/Eject Button
1
6.
(TAPE) Pause Button
1
7.
Cassette Compartment
1
8.
CD Compartment
1
9.
CD Eject Button
10.
Tuning Control
11.
(CD) Stop Button
12.
(CD) Track Down/Review Button
13.
Volume Control
14.
Stand-by, On/Function Switch
15.
(CD) Track Up/Cue Button
16.
(CD) Play/Pause Button
17.
(CD) Play Indicator
18.
(CD) Pause Indicator
19.
Battery Compartment
20.
FM Telescopic Rod Aerial
21.
Headphone Socket
22.
AC Power Input Socket
1 2 3 4 5 6 7
8
9
10
11
16
17
18
13
14 15
12
19
21
20
22
QT-CD210H(SUK) TINSE0034SJZZ
2
<P=003>
POWER SOURCE 
AC power 
To AC INPUT
AC 230-240 V, 50 Hz
5
4
6
1
3
2
 
To an AC socket
Connect the AC power lead to the AC power input
socket, then connect the AC power lead plug to an
AC socket.
Notes:
If the unit will not be used for a long period of
time, remove the AC power lead from the AC
socket.
Connection of the AC power lead to the unit
disconnects the batteries.
Never use a power lead other than the one
supplied. Use of a power lead other than the one
supplied may cause an electric shock or fire.
Battery power
1
Disconnect the AC power lead, and remove the
battery compartment cover.
2
Insert 6 "D" size batteries (UM/SUM-1, R20,
HP-2 or similar) into the battery compartment.
When inserting or removing the batteries 
 and
, push them towards the 
ë
 battery terminals. 
Installing the batteries incorrectly may cause the
unit to malfunction.
Batteries are not included.
3
Replace the battery compartment cover.
Precautions for battery use:
Insert the batteries according to the direction
indicated on the rear panel.
Replace all old batteries with new ones at the
same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery
leakage.
Caution:
Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
Battery replacement:
Replace the batteries when they become weak
and/or recording or playback is impaired. This may
occur even though radio broadcasts are audible.
RADIO OPERATION 
1
Set the function switch to AM or FM.
2
Use the TUNING control to tune in to the desired
station.
During FM stereo reception, it automatically 
switches to monaural when the signal is weak.
Aerial adjustment
ON/STAND-BY
(Function)
TUNING
FM
AM
After use:
Set the ON/STAND-BY switch to STAND-BY.
QT-CD210H(SUK) TINSE0034SJZZ
3
Page of 8
Display

Download Sharp QT-CD210 User Guide / Operation Manual

Here you can read online and download Sharp QT-CD210 User Guide / Operation Manual in PDF. QT-CD210 user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp QT-CD210 Portable. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.