QT-CD210 - Sharp Audio User Guide / Operation Manual. Page 2

TO

<P=001>

●

The letters in brackets contained in the model
number indicate the colour of the product only.
Operation and specifications are unaffected.

●

When the ON/STAND-BY switch is set at
STAND-BY position,  mains voltage is still pres-
ent inside the unit. 

Warning:
This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation
and when not in use for a long period.

●

Recording and playback of any material may
require consent, which SHARP is unable to give.
Please refer particularly to the provisions of the
Copyright Act 1956, the Dramatic and Musical
Performers Protection Act 1958, the Performers
Protection Acts 1963 and 1972 and to any sub-
sequent statutory enactments and orders.

●

This equipment complies with the requirements
of Directives 89/336/EEC and 73/23/EEC as
amended by 93/68/EEC.

Warning:
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.

●

Use of controls, adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure. 

As the laser beam used in this compact disc
player is harmful to the eyes, do not attempt to
disassemble the cabinet. Refer servicing to
qualified personnel only.

×

●

The AC power lead is located in the packing
material.

●

Parts and accessories mentioned in this oper-
ation manual other than those in the drawing are
not included.

■

●

Do not use oil, solvents, petrol, paint thinners or
insecticides on the unit.

●

Do not expose the unit to moisture, to tempera-
tures higher than 60˚C (140˚F) or to extreme low
temperatures.

●

Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home compu-
ters, facsimiles, etc.) which generates electrical
noise.

●

Hold the AC power plug by the head when re-
moving it from the AC socket, as pulling the lead
can damage internal wires.

●

When cleaning the heads, pinch roller, etc,
remove the AC power plug from the wall socket
as the unit contains high voltages.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.

●

Use the unit on a firm, level surface free from
vibration, and do not place anything on the top
of the unit.

●

If the unit does not work properly whilst in use,
set the ON/STAND-BY switch to STAND-BY and
then to ON again.

●

If an electrical storm is taking place near you, it
is suggested that you disconnect the AC power
lead from the AC socket for safety.

●

The ventilation should not be impeded by cover-
ing the ventilation openings with items, such as
newspapers, tablecloths, curtains, etc.

●

No naked flame sources, such as lighted cand-
les, should be placed on the apparatus.

●

Attention should be drawn to the environmental
aspects of battery disposal.

●

The apparatus is designed for use in moderate
climate.

Warning:
The voltage used must be the same as that specified
on this unit. Using this product with a higher voltage
other than which is specified is dangerous and may
result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.

■

Sudden temperature changes, storage or operation
in an extremely humid environment may cause con-
densation inside the cabinet (CD pickup, tape
heads, etc.).
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or
cassette) in the unit until normal playback is possible
(about 1 hour).

QT-CD210H(SUK) TINSE0034SJZZ