Read Sharp HT-SB60 (serv.man7) Technical Bulletin online
AUD 2013 04 08
Date of Issue: 29
th
April 2013
Classification:
White
AUDIO TECHNICAL BULLETIN
Page 5 of 6
Sharp Electronics (UK) Limited
Reference
– TSI-1330003
Revision - 2
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
HDMI FIRMWARE
Firmware Upgrading
Firmware Upgrading
1. Download and install the EP flash application including the USB driver and the firmware (hex
file).
NOTE - The AC cord on the HT-SB60 must be removed before making a connection.
2. Connect the Update Jig to a USB terminal on a PC and the flash cable to the flash terminal
of the HT-SB60 as show in the image below:
3. Plug in the HT-SB60 AC Cord.
Ensure the unit is in stand-by mode.
4. Open the "EP FLASH" programme on PC.
Click on the first or last page to see other HT-SB60 (serv.man7) service manuals if exist.