Read Sharp HT-SB60 (serv.man7) Technical Bulletin online
AUD 2013 04 08
Date of Issue: 29
th
April 2013
Classification:
White
AUDIO TECHNICAL BULLETIN
Page 3 of 6
Sharp Electronics (UK) Limited
Reference
– TSI-1330003
Revision - 2
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
Loading the firmware to the Flash Writer
1. Download the software for the S550-SFW1U serial flash microcomputer programmer.
2. Extract the file and fol
2. Extract the file and fol
low the instructions provided in the file “readme.txt”.
3. Once the serial flash programmer is installed, connect the programmer to a PC using a USB
cable.
4. Open the S550-SFW1U application.
5. Within the S550-SFW1U application, use the settings as per the below picture.
5. Within the S550-SFW1U application, use the settings as per the below picture.
6. Load the file SB60_1026_121127.mot.
7.
7.
Select “Download” and the jig will have the latest firmware installed.
8. Exit the S550-SFW1U application and remove the jig from your PC.
The jig is now programmed and ready to use.
Note
– The jig only needs programming once.
Click on the first or last page to see other HT-SB60 (serv.man7) service manuals if exist.