Read Sharp CD-DP2500 (serv.man3) User Guide / Operation Manual online
26
(Main unit operation)
(Continued)
About the TP and TA indicators
TP indicator
TA indicator
Meaning
Not lit
Not lit
This programme does not carry traffic announcements nor
does it refer, via EON, to a programme that does.
Not lit
Lit
This programme carries EON information about another
programme which gives traffic information.
Lit
Not lit
This programme carries traffic announcements but none
are being broadcast at present and may also carry EON
information about other traffic announcements.
information about other traffic announcements.
Lit
Lit
A traffic announcement is being broadcast on this
programme at present.
■
EON-TI
1
Tune in the desired RDS station (when a station name is
being displayed).
being displayed).
2
Press the EON button when “EON” appears.
●
“PTY TI” and “SELECT” will appear alternately for about
6 seconds.
6 seconds.
3
Whilst they are being displayed, select the TI (Traffic Infor-
mation) using the PRESET (
mation) using the PRESET (
X
or
W
) button.
●
The selected “TI” will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
●
“TI” and “WAITING” will appear for 2 seconds each.
●
“TI” will appear, and the unit will enter the EON-TI stand-
by mode.
by mode.
5
When a TA specifed starts on an ON (other network) sta-
tion, the unit will automatically switch to that station, and
“TI” will flash.
tion, the unit will automatically switch to that station, and
“TI” will flash.
6
When the traffic announcement is over, the unit will auto-
matically return to the original station you were tuned to.
matically return to the original station you were tuned to.
Note:
●
If the EON button is pressed when “EON” is not displayed,
“NO EON” will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
“NO EON” will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button.
(“TI”
(“TI”
→
“WAITING”)
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within
4 seconds, press it again. The EON stand-by mode will be can-
celled.
4 seconds, press it again. The EON stand-by mode will be can-
celled.
●
“TI” will go out.
Note:
●
If neither “TP” nor “TA” appear, then even if “EON” appears
the unit cannot enter the EON-TI stand-by mode. In this
condition, if the PTY.TI SEARCH button is pressed after TI
is selected, “NO TI” will flash for 4 seconds.
the unit cannot enter the EON-TI stand-by mode. In this
condition, if the PTY.TI SEARCH button is pressed after TI
is selected, “NO TI” will flash for 4 seconds.
Click on the first or last page to see other CD-DP2500 (serv.man3) service manuals if exist.