Read Sharp CD-DP2500 (serv.man3) User Guide / Operation Manual online
24
(Main unit operation)
(Continued)
(Main unit operation)
■
To manually recall the stations stored in
memory
memory
Press the PRESET (
X
or
W
) button.
●
Each time the button is pressed, the channel number will
change.
change.
●
After the channel number has been displayed for 2 sec-
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
■
To switch the display
Each time the DISPLAY MODE button is pressed whilst an FM
station is tuned in, the display will switch as follows:
station is tuned in, the display will switch as follows:
Station
→
Programme
→
Radio text
→
Frequency
name (PS)
type (PTY)
(RT)
↑
When the station you are tuning in is not an RDS station or
even if it is an RDS station but it is very weak signal, the dis-
play will change in the following order:
even if it is an RDS station but it is very weak signal, the dis-
play will change in the following order:
“NO PS”
→
“NO PTY”
→
“NO RT”
→
Frequency
↑
Notes:
●
“NO PS”, “NO PTY” or “NO RT” will flash for about 5 sec-
onds, and then the frequency will be displayed.
onds, and then the frequency will be displayed.
●
The display can only be switched whilst tuned to the FM
band.
band.
■
Notes for Radio text
●
The radio text for 8 characters will be displayed steadily for
4 seconds and then it will scroll across the display.
●
If you tune into a station which is not broadcasting any radio
text, even if it is an RDS station, when you switch to the
radio text position “NO RT” will be displayed.
text, even if it is an RDS station, when you switch to the
radio text position “NO RT” will be displayed.
●
Whilst radio text data is being received or when the text
contents change, “RT” will be displayed.
contents change, “RT” will be displayed.
■
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty.
unit is faulty.
●
“PS”, “NO PS” and a station name appear alternately, and
the unit does not operate properly.
the unit does not operate properly.
●
If a particular station is not broadcasting properly or a sta-
tion is conducting tests, the RDS reception function may
not work properly.
tion is conducting tests, the RDS reception function may
not work properly.
●
When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed, even
if “RDS” is lit.
information like the station name may not be displayed, even
if “RDS” is lit.
Click on the first or last page to see other CD-DP2500 (serv.man3) service manuals if exist.