Read Sharp CD-DP2500 (serv.man3) User Guide / Operation Manual online
25
(Main unit operation)
(Continued)
■
EON-PTY
1
Tune in the desired RDS station (when a station name is
being displayed).
being displayed).
2
Press the EON button when “EON” appears.
●
“PTY TI” and “SELECT” will appear alternately for about
6 seconds.
6 seconds.
3
Whilst they are being displayed, select the desired
programme type using the PRESET (
programme type using the PRESET (
X
or
W
) button.
●
The selected programme type will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
●
The selected programme type and “WAITING” will be dis-
played for 2 seconds each.
played for 2 seconds each.
●
“PTY” will appear, and the unit will enter the EON-PTY
stand-by mode.
stand-by mode.
5
When a programme of the type specified starts on an ON
(other network) station, the unit will automatically switch to
the station broadcasting the selected programme type, and
“PTY” will flash.
(other network) station, the unit will automatically switch to
the station broadcasting the selected programme type, and
“PTY” will flash.
6
When the programme specified for the ON station is over,
the unit will automatically return to the original station you
were tuned to.
the unit will automatically return to the original station you
were tuned to.
Note:
●
If the EON button is pressed when “EON” is not displayed,
“NO EON” will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
“NO EON” will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button.
(“Programme type”
(“Programme type”
→
“WAITING”)
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within
4 seconds, press it again. The EON stand-by mode will be can-
celled.
4 seconds, press it again. The EON stand-by mode will be can-
celled.
●
“PTY” will go out.
About the PTYI (Dynamic PTY Indicator):
PTYI (Dynamic PTY Indicator) will appear whilst the Dynamic
PTY station is being received.
Dynamic PTY indicates that the PTY for the station tuned in, or
the PTY referenced in the EON data, is assessed whenever
the programme changes and may be changed.
PTY station is being received.
Dynamic PTY indicates that the PTY for the station tuned in, or
the PTY referenced in the EON data, is assessed whenever
the programme changes and may be changed.
PTYI
Meaning
Lights up
Tuned into a dynamic PTY station.
Goes out
Tuned into a static PTY.
Note:
●
When “PTYI” appears, if you press the DISPLAY MODE but-
ton to display the programme type, you can check the type
of programme you are actually receiving.
ton to display the programme type, you can check the type
of programme you are actually receiving.
Click on the first or last page to see other CD-DP2500 (serv.man3) service manuals if exist.