Read Sharp CD-DP2500 (serv.man2) User Guide / Operation Manual online
17
RADIO OPERATION
■
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the desired fre-
quency band. (FM ST, FM or AM)
quency band. (FM ST, FM or AM)
4
Press the TUNING/TIME (
X
or
W
) button to tune into the
desired station.
Manual tuning:
Press the TUNING/TIME (
X
or
W
) button as many times
as required to adjust the frequency shown on the display to
the frequency of the desired station.
the frequency of the desired station.
Auto tuning:
When the TUNING/TIME (
X
or
W
) button is pressed for
more than 0.5 seconds, scanning will start automatically and
the tuner will stop at the first receivable broadcast station.
the tuner will stop at the first receivable broadcast station.
Notes:
●
When radio interference occurs during auto scan tuning,
auto scan tuning may stop automatically at that point.
auto scan tuning may stop automatically at that point.
●
If a weak station signal is found during auto scan tuning,
the station will be skipped.
the station will be skipped.
●
To stop the auto tuning, press the TUNING/TIME (
X
or
W
) button again.
●
When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first, and then the RDS
indicator will light, Finally, the station name will appear.
the frequency will be displayed first, and then the RDS
indicator will light, Finally, the station name will appear.
5
To receive an FM stereo transmission, press the TUNER
(BAND) button so that the “ST” indicator on the display lights
up.
(BAND) button so that the “ST” indicator on the display lights
up.
●
“
j
” will appear when an FM broadcast is in stereo.
6
If the FM reception is weak, press the TUNER (BAND) but-
ton so that the “ST” indicator goes out.
ton so that the “ST” indicator goes out.
●
Although the reception changes to monaural, the sound
becomes clearer.
becomes clearer.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
Note:
●
The last station tuned in will be recalled, even after chang-
ing the tuning band or the function, or after switching the
unit to the stand-by mode.
ing the tuning band or the function, or after switching the
unit to the stand-by mode.
(Main unit operation)
