Read Sharp CD-DP2500 (serv.man2) User Guide / Operation Manual online
16
(Continued)
■
APMS
(Automatic Programmable Music Selector)
(Automatic Programmable Music Selector)
You can playback the tracks on the CDs in the disc 1 - 3 posi-
tions in any order desired. By specifying the disc numbers from
1 to 3, and the track numbers from 1 to 99, you can choose up
to 32 selections for playback in the order you like.
tions in any order desired. By specifying the disc numbers from
1 to 3, and the track numbers from 1 to 99, you can choose up
to 32 selections for playback in the order you like.
1
When in the stop mode, use the disc number buttons (DISC-1
– DISC-3) to select the desired disc number.
– DISC-3) to select the desired disc number.
2
Press the
5
(
5 3
) or
4
(
2 4
) button to select
the desired track.
3
Press the MEMORY/SET (MEMORY) button.
●
“MEMORY” will appear to show that the programmed
sequence is being entered into memory.
sequence is being entered into memory.
4
Repeat steps 1 - 3 for any other track. Up to 32 tracks can
be programmed.
be programmed.
●
If you make a mistake whilst in the programming mode
(“MEMORY” will appear) or if you wish to change your
selections, the programmed tracks can be cleared by
pressing the CLEAR button. The tracks will be cleared
sequentially, starting with the last track entered.
(“MEMORY” will appear) or if you wish to change your
selections, the programmed tracks can be cleared by
pressing the CLEAR button. The tracks will be cleared
sequentially, starting with the last track entered.
5
Press the
0
/
R
(
0R
) button to start playback of pro-
grammed selections.
To clear the programmed selections:
Press the CLEAR button on the remote control whilst the disc
is stopped.
is stopped.
●
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed.
beginning with the last track programmed.
Notes:
●
Opening the disc tray automatically cancels the programmed
sequence.
sequence.
●
Even if you press the ON/STAND-BY button to enter the
stand-by mode or the function is changed from CD to some
other function, the programmed selections will not be
cleared.
stand-by mode or the function is changed from CD to some
other function, the programmed selections will not be
cleared.
●
During APMS operation, random play is not possible.
■
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be
continuously repeated.
continuously repeated.
To repeat all tracks on up to 3 discs:
Press the
0
/
R
(
0R
) button twice.
●
“
R
” will appear.
To repeat a programmed sequence:
1
Programme a sequence of up to 32 tracks.
2
Press the
0
/
R
(
0R
) button twice.
●
“
R
” will appear.
To cancel repeat play:
Press the
0
/
R
(
0R
) button again.
●
“
R
” will go out.
Note:
●
When using repeat play, be sure to press the
■
(CD
■
)
button after you are through listening.
Otherwise, the CD(s) will play continuously.
Otherwise, the CD(s) will play continuously.
Repeat indicator
Selected disc number
Playback order
Selected track number
Click on the first or last page to see other CD-DP2500 (serv.man2) service manuals if exist.