Read Sharp CD-DP2500 (serv.man2) User Guide / Operation Manual online
3
4
1
2
3.2 mm (1/8")
9 mm (3/8")
5 mm
(3/16")
(3/16")
Min. 22 mm (7/8")
Wall surface
Wall surface
(Continued)
■
To mount the surround speakers on the wall
The design of the surround speakers allows them to be hung
on the wall.
Be sure to use the type and size of screw that is shown to the
left.
on the wall.
Be sure to use the type and size of screw that is shown to the
left.
1
Make a hole in the wall using a drill.
2
Drive a wall mount plug into the hole using a hammer. Drive
the wall mount plug in until it is flush with the wall surface.
the wall mount plug in until it is flush with the wall surface.
3
Drive one screw into the wall mount plug for each speaker
as shown in the illustration.
as shown in the illustration.
●
Drive the screws, so there is about a 5 mm (3/16") space
between the wall and the head of the screw.
between the wall and the head of the screw.
4
Mount the surround speaker on the wall so that the screw
head is inserted into the slot on the surround speaker.
head is inserted into the slot on the surround speaker.
8
■
Removing the speaker grilles
1
Remove the lower part of the speaker grille first.
2
Remove the upper part of the speaker grille.
●
The speaker grilles on the centre and surround speakers
are not removable.
are not removable.
Caution:
When the speaker grilles are removed, the speaker diaphragms
are exposed. Make sure nothing comes into contact with the
speaker diaphragms.
When the speaker grilles are removed, the speaker diaphragms
are exposed. Make sure nothing comes into contact with the
speaker diaphragms.
■
Mounting the speaker grilles
Fit the four posts on the speaker grille into the mounting holes
and push them lightly with the palm of your hand to secure.
and push them lightly with the palm of your hand to secure.
32 mm
(1-1/4")
(1-1/4")
8-9 mm
(3/8")
(3/8")
Wall mounting screw
(Front speaker only)
Click on the first or last page to see other CD-DP2500 (serv.man2) service manuals if exist.