Read Panasonic KX-TCD951GB / KX-TCD955GC Service Manual online
61
KX-TCD951GB/KX-TCD955GC
3.1.2 Base Unit EEPPROM adjustment parameters.
This section describes the EEPROM parameters needed for adjustment. When programming the EEPROM to default
settings none of these settings are overwritten. Only if the value FFh is found in one of these parameters, the parameter will
be programmed to default setting. Note that adjustment parameters are not allowed to be equal to 0xFF, if so they will
be reprogrammed by the default programming.
settings none of these settings are overwritten. Only if the value FFh is found in one of these parameters, the parameter will
be programmed to default setting. Note that adjustment parameters are not allowed to be equal to 0xFF, if so they will
be reprogrammed by the default programming.
Address
Name
Description
10
Frequency
Crystal frequency
16
BMC. Vol Flt M
Modulation
19
BMC. Lsr Mic Gain
Load speaker and mic gain
32-33
Dsp Dtmf Gain
Gain of DTMF tones
3A
BSUI Config
Configuration of base station
3B-3C
Dsp Signal Limit
PSTN line signal limit
3F
Country Code
Country code to be sent to TAM module.
40
Quad Tune
DA converter output for Quadrature.
7b
LI. Flags
Various line interface flags.
82
Tam Flags
Various Tam module configuration flags.
036B..0371
FF
0372
06
0373
09
0376
03
0377
0B
037B
E0
037C
64
038A
0E
038B
00
038C
19
038E
06
038F..03DF
FF
Free_Block_0b to
Free_Block_7f
Free_Block_7f
Free Block
03E0..0407
FF
Enable to
RingMinTimeout
RingMinTimeout
FSK data
Click on the first or last page to see other KX-TCD951GB / KX-TCD955GC service manuals if exist.