Read Panasonic PT-RZ670 / PT-RW630 (serv.man14) Other Service Manuals online
SECTION 1 SERVICE INFORMATION
< RZ670/RW630 >
5
DG
■ Remote control does not respond
● Cannot control from front side
DG
Check the waveform of [CW3 INDEX] line
TPDG13 : 180Hz pulse (image no input)
TPDG13 : 180Hz pulse (image no input)
CW
Check the connector cable (RT1-DG11, CW1-RT3)
Check and replace the CW-P.C.Board
Check and replace the CW-P.C.Board
Power-supply line check <6>
IC4002 output voltage TP4005 : Approx 8.5V
TP4008 : Approx -10V
TP4009 : Approx 16V
IC4002 output voltage TP4005 : Approx 8.5V
TP4008 : Approx -10V
TP4009 : Approx 16V
DG Check the IC4002 and peripheral circuit
FM Replace the FM-P.C.Board
Check the IC6501
Replace the DG-P.C.Board
Replace the DG-P.C.Board
DG
The signal waveform can be detected at 11pin of
DG8 connector when the remote control is operated
DG8 connector when the remote control is operated
DG
BR
Check the cable connector between DG8 and BR1
Replace the BR-P.C.Board
Replace the BR-P.C.Board
DG
The signal waveform can be detected at 4pin of
IC6506 when the remote control is operated
IC6506 when the remote control is operated
DG
DG
The signal waveform can be detected at 10pin of
DG6 connector when the remote control is operated
DG6 connector when the remote control is operated
DG
R
Check the cable connector between DG6 and R1
Replace the R-P.C.Board
Replace the R-P.C.Board
DG
Replace the DG-P.C.Board
● Cannot control from rear side
DG
The signal waveform can be detected at 6pin of
IC6511 when the remote control is operated
IC6511 when the remote control is operated
DG Check the IC6511, JK6501(REMOTE 1 IN) and Q6506
DG
Check the IC6506 and peripheral circuit
NG
NG
OK
OK
NG
NG
OK
OK
NG
OK
NG
OK
INF - 40
Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man14) service manuals if exist.