PT-RZ670, PT-RW630 (serv.man14) - Panasonic Projector Other Service Manuals (repair manual). Page 41

Read Panasonic PT-RZ670 / PT-RW630 (serv.man14) Other Service Manuals online

SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
DG
DG
DG  Check the IC6509 and peripheral circuit
DG
 The signal waveform can be detected at 15 pin
 of IC6510 when a power is turned on and off
 by remote control
DG  Check the IC6510 and peripheral circuit
DG
 The signal waveform can be detected at
 10, 12, 16, 17pin of IC6509 when the command
 is transmitted
 Connect the cables properly
 Replace the DG-P.C.Board
 Replace the DG-P.C.Board
 ■ REMOTE 2 IN does not respond
 Check the cable connection of JK6505 (REMOTE 2)
DG
 The signal waveform can be detected at R6591
 when the remote control is operated
DG
 The signal waveform can be detected at 6pin of
 IC6511 when the remote control is operated
DG
 ■ SERIAL IN/OUT does not respond
 Connect the cables properly
 ● Cannot control at wired remote control
 Check the cable connection of JK6503/JK6504
 (SERIAL IN/OUT)
 Check the IC6501
 Replace the DG-P.C.Board
 Check the remote control cable
DG  Check the IC6511, JK6501, Q6506
OK
NG
NG
OK
OK
NG
NG
OK
NG
OK
NG
OK
INF - 41
Page of 42
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man14) service manuals if exist.