Read Panasonic PT-RQ13K (serv.man2) Service Manual online
INF-27
SECTION 1 SERVICE INFORMATION
< RQ13K >
4. 5. Security password
4.5.1. Control device password
Take the procedure below to restore the factory default password (AAAA).
1. Press the [AUTO SETUP] button on the remote control or on the control panel of projector for more than 3 seconds while
the control device password input request menu is displayed on the screen.
2. Press the [▼] button for more than 3 seconds.
The password will be initialized.
4.5.2. Initial security password
Initial password : Press [p u q t p u q t] button sequentially and press [ENTER] button.
If the initial password has been changed, ask user to have it.
4.4.3. How to remove the Interface Board
Handle
Fig. 1
1) Remove the Interface Board. (Fig. 1)
f
.
.
f
Hold the handle of the Interface Board and remove it slowly.
2) Attach the slot cover.
f
Attach the stored slot cover
1).
Attention
f
Always attach the slot cover on the blank slot.
f
Store the removed Interface Board inside an antistatic bag.
Click on the first or last page to see other PT-RQ13K (serv.man2) service manuals if exist.